单相AC-DC变换电路(A题)【本科组】王协平答题.docVIP

 PAGE 21 2013年全国大学生电子设计竞赛 单相AC-DC变换电路（A题） 【本科组】 参赛学校：江西科技师范大学 参赛人员：王 协 平 张 紫 祥 张 超 指导教师：曾 旺 辉 2013年9月2日 单相AC-DC变换电路（A题）【本科组】 摘要：高功率因数电源是提高电源输入端功率因数的高性能电源，应用日益广泛。本系统采用有源功率因数校正（APFC）方法，对BOOST主电路拓扑结构的升压电路的输入电流进行控制，使其达到与输入电压同频且相位差为0，功率因数接近于1，从而实现高功率因数电源。系统采用UCC28019作为控制器，提高了电源的功率因数，具有良好的电压调整率和负载调整率，输入电流波形失真度小于5%，功率因素大于0.98，效率达到95.2%，且采用单片机对整个系统进行监测，可测量输出电压、输出电流、功率因数以及可实现输???电压自动设置等功能。系统在设计时从布局布线和滤波等方面消除电磁干扰，能够实现电压、电流、功率因数的测量及中文显示功能，界面友好美观。 关键词：AC-DC转换；UCC28019；APFC；BOOST Abstract: The high power factor of power supply is the high performance power supply that it can increase the power input power factor with becoming more and more widely. This system adopts the active power factor correction (APFC) method, which to control for the input current of the booster circuit of the BOOST main circuit topology, to attain the input voltage with the same frequency and phase difference being zero, and the power factor being closer to 1, so as to realize high power factor of power supply. The system is used the UCC28019 as controller in order to improve the power factor of power supply that it has the excellent voltage regulation and the load regulation, and has less than 5% about the input current waveform distortion, and has greater than 0.98 about the power factor, and the efficiency reached has more than 95.2%. and has adopted the single chip microcomputer to monitor the quality of the whole system , and to measure the output voltage, to output current, to power factor, and can be set up to realize automatic output voltage, and other functions.When the design from the aspects such as layout and filtering to eliminate electromagnetic interference. the System can realize the voltage, current, power factor measurement and Chinese display functions, interface is friendly and beautiful. Keyword：AC-DC conversion, UCC28019,APFC, BOOST 目录  TOC \o 1-3 \h \z \u  HYPERLINK \l _Toc372409275 1．方案设计与论证  PAGEREF _Toc372409275