注塑-仪表盖塑模设计-正文.docVIP

摘要 、 关键词 论文题目：仪表盖塑料模设计 论文摘要：对塑件结构分析和原材料分析，模具型腔结构的形式设计，塑件的相关计算，注塑机的选择，分析了分型面的选择和浇注系统的设计，模架的选取和成型零件的计算，推出机构的设计，分析了塑件试模与修模过程以及滑块加工工艺过程。 根据生产批量和条件(加工条件和模具制造条件)确定工序组合，因为生产批量大，所以将各个工序组合在一起，这样就提高了产品的生产率。通过充分利用现代模具制造技术对传统机械零件进行结构改进、优化设计、优化工艺方法能大幅度提高生产效率，这种方法对类似产品具有一定的借鉴作用。 关键字：pro-e分模；型芯；分型面；模架；塑件收缩；Plastic Advisor（塑料顾问） Abstract、 Keywords Paper topic: the desingn for injecting the world to meter watch cover To models the structure analysis and raw material analysis, the mold die space structure form design, models the correlation computation, the injection molding machine choice, analyzed has divided the profile the choice and the casting system design, the pould frame selection and the formation components computation, promoted the organization the design, analyzed has the experimental mold with repairs the mold process. According to produce the batch quantity and condition( processing to the condition and molding tools to make the condition) to make sure the work that the preface combine, because of produce the batch quantity big, so combine each work preface together, raising the rate of production of the product thus.Pass to make use of the modern molding tool manufacturing technique to carry on the structure improvement to the traditional machine spare parts well, excellent turn the design, the excellent chemical engineering skill method ability the significant exaltation produces the efficiency, this kind of method to similar the product has to certainly draw lessons from the function. Key words: A pro-e minute mold the core; divides the profile; the pould frame; models a shrinkage; Plastic Advisor (plastic consultant) 目 录 前言……………………………………………………………………………………(1) 1 塑件分析……………………………………………………………………(2) 1.1 塑件结构分析……………………………………………………………………(2) 1.2 塑件材料分析……………………………………………………………………(2) 2 拟定模具结构形式……………………………………………………… (4) 2.1 确定型腔数量及排列方式………………………………………………(4) 2.2 结构形式的确定……………………………………………………………… (4) 3 塑件的相关计算及注塑机的选择……………………………………………(7) 3.1 塑件的计算……………