Netapp VFILER 安装配置指导书.docVIP

netApp存储安装配置指导书 (------Netapp VFILER 的安装和配置使用方法------) Netapp VFILER 的安装和配置使用方法 一:首先要安装Multistore 的license fas270alicense add ******** 二:使用命令方式配置vfiler 1: fas270a vfiler create vfiler1 -i 10.0.0.89 /vol/vol0/test Mon Sep 19 11:58:37 CST [vfiler1@iscsi.adapter.online:notice]: ISCSI: iswta, Ada pter brought online. Mon Sep 19 11:58:37 CST [vfiler1@iscsi.service.startup:info]: iSCSI service star tup exportfs: Could not open for reading /etc/exports The etc configuration directory for vfiler vfiler1 is /vol/vol0/test/etc. Setting up vfiler vfiler1 Mon Sep 19 11:58:37 CST [vfiler1@rc:notice]: Vfiler vfiler1 initialized. Configure vfiler IP address ******** [y]: Interface to assign this address to {e0}: Interface to assign this address to {e0}: ******** Netmask to use: [255.0.0.0]: 255.255.255.0 The administration host is given root access to the filers /etc files for system administration. To allow /etc root access to all NFS clients enter RETURN below. Please enter the name or IP address of the administration host: Do you want to run DNS resolver? [n]: Do you want to run NIS client? [n]: ifconfig: 10.0.0.86: no such interface Changing password for user root on vfiler vfiler1 New password: Retype new password: User root added. Mon Sep 19 12:02:05 CST [vfiler1@rc:info]: User root added Do you want to setup CIFS? [y]: Enable CIFS access to the filer by a Windows(tm) PC Your filer is currently only visible to PCs on the same net. Do you wish to make the system visible via WINS? [no]: etype new password: User root added. Mon Sep 19 12:02:05 CST [vfiler1@rc:info]: User root added Do you want to setup CIFS? [y]: Enable CIFS access to the filer by a Windows(tm) PC Your filer is currently only visible to PCs on the same net. Do you wish to make the system visible via WINS? [no]: CIFS requires local /etc/passwd and /etc/group files for multiprotocol. Default passwd file will be created containing root, pcuser, an