毕业设计（论文）-35KV变电所及配电线路设计--189593596.docVIP

35KV变电所及配电线路设计 35KV变电所及配电线路设计 - PAGE 4 - - PAGE 42 - 摘 要 随着现代文明的发展与进步，社会生产和生活对电能供应的质量和管理提出了越来越高的要求。作为电能传输与控制的中间枢纽，变电所必须改变传统的设计和控制模式，才能适应现代电力系统、现代化工业生产和社会生活的发展趋势。35KV工厂供电设计包括负荷的计算及无功功率的补偿；变电所主变压器台数和容量、型式的确定；变电所主接线方案的选择；进出线的选择；短路计算和开关设备的选择；二次回路方案的确定及继电器保护的选择和整定；防雷保护与接地装置的设计；车间配电线路布线方案的确定；线路导线及其配电设备和保护设备的选择；以及电气照明的设计和电路图的绘制。 关键词：35KV变电所, 配电线路设计与选择 Abstract Along with the development of modern civilization and progress, social production and the life to the electric power supply of quality and management put forward more and more high demand. As with the control of the power transmission project, must change the substation of traditional design and control mode to adapt to the modern electric power system, modern industrial production and the development trend of social life. 35 KV power supply design including the factory load calculation and reactive power compensation; Main transformer substation capacity, the type of Numbers and determined, and The choice of the substation wiring schemes; In the choice of qualification; Short circuit calculation and switch equipment choice; The scheme determination of the secondary circuit and protection relay choice and setting; Lightning protection and grounding device design; Workshop distribution circuit wiring scheme determined, and the Line wires and its power distribution equipment and to protect the equipment choice; And electrical lighting design and drawing of the circuit. Keyword: 35 KV substation，Distribution circuit design 目录 摘要 1 TOC \o 1-3 \u 第1章 35KV变电所及配电线路设计 5 1.1负荷计算 5 1.2 无功补偿计算及设备选择 6 1.3 变电所位置的选择 12 1.3.1 变电所的分类 12 1.3.2 变电所所址选择的一般的应遵循的原则 12 1.4 变电所的主变压器台数和容量的选择 13 1.4.1 主变压器台数的选择 13 1.4.2 主变压器容量的选择 14 1.5 变电所主接线方案的设计 14 1.6 短路电流和容量的计算 16 1.7 变电所一次设备的选择 23 1.7.1 一次设备选择的一般要求 23 1.7.2选择各类电气设备的特别的要求 24 1.7.3 一次设备校验应满足的条件 25 1.8 变电所高压进线和低压出线的选择 29 1.8.1变电所进线方式的选择 30 1.8.2 变配电所进出导线和电缆的选择