December2003-IPC.docVIP

IPC-T-50G Part 12 of 12 Turret Solder Terminal 37.1552 塔形焊接端子 A round post-type stud (stand-off) solder terminal with a groove or grooves around which one or more wires are wrapped prior to soldering. (See Figure T-3.) 圆柱形 (竖直的), 有能够焊接导线的凹槽或者环状凹槽的接线柱. Twist 60.1553 扭曲 The deformation of a rectangular sheet, panel or printed board, that occurs parallel to a diagonal across its surface, such that one of the corners of the sheet is not in the plane that contains the other three corners. 矩形片状, 平板或者印刷线路板的变形, 导致表面上的边及对角线, 导致板上的一个角与另外三个角不在一个平面上. Two-Layer Carrier Tape 36.1554 双镀膜承载带 The ca