耐热型乙烯酯树脂玻璃鳞片涂料.docVIP

Intended Uses 用途 适用于涂装有高温要求的部位（原烟道，旁烟道，GGH等），也适用于保护长期接触化学物质或其他液体介质的地方，具有更高的耐温性能。（≤200℃） Suited for painting the area which needs heat-resistant,protection such as flue pipes,chimney, GGH etc, it is suited for anti-corrosive protecting the area which is close to chemicals or other liquids too, about the details, This paint possesses higher-temperature resistant property ≤200℃ Product Information产品简介 乙烯酯树脂鳞片面层涂料，包含专用耐热酚醛型乙烯酯树脂为主要成膜基料，加入加入20目到800目片径的粗玻璃鳞片、颜填料、活性稀释剂、消泡、分散、抗流挂等助剂，施工时按照一定比例加入乙（固化剂）、丙（促进剂）组份，混合均匀。 极佳的硬度和耐磨性能； 柔韧性、耐温变和抗疲劳特性、附着良好。 抗介质渗透力及强。 抗化学介质，耐常见化学品腐蚀。 This paint contains specially heat-resistant phenolic-modified vinyl ester and glass flake 20-80D ,pigments, activity thinner foamtrol, dispersion agent etc assistants. Before application, please add component Band C into componet A, stir it thoroughly till to homogenous.. Excellent hardness and abrasive-resistant property Excellent flexibility,temperature change-resistance and durability, adhesion to substrate. Seeresistant property is excellent. Stable to chemical, anti-corrosive to usual chemicals. Application details 产品数据 Volume Solids 固体份 ≥96% Colour 颜色 Limited colors，r any color according to Custome,srequests 有限颜色，也可按照客户要求调配颜色 Dry Flm Thickness干膜厚度 800-1000microns 800-1000微米 Theoretical Coverage 理论涂布率 0.7m2 /Kg 0.7平方米/公斤 Practical Coverage 实际涂布率 Allow appropriate loss 允许适量损耗 Storage and Handling 施工详述 Allow appropiate A:B:C 20:0.3:0.2 by weight 甲：乙： 20:03:0.2（重量比） During mixing and Using ,be sure that it is free from foreign substances 混合和使用过程中应避免混入水等杂质 Induction Time 熟化时间 Not necessary 不需要熟化 Method of Application施工方法 Recommended: blade coating 推荐采用：刮涂 Pot Life 使用期 15℃：60min; 25℃:40min; 35℃: 15min We can adjust the pot life and drying time according the temperature. 我公司可应客户要求根据涂装环境温度调整使期和涂膜干燥时间 After mix ,please use up it during the Valid time, or it is wasted. 涂料混合后，宜在使用期内用完，过期不能使用 tThinner 稀释剂 C015，According to the method of application and viscosity Thinner shou