绑钩器使用.docVIP

Press the hook set button to set the hook poink in the direction of the slit until it clicks and storps Push in the hook guide at the hook stem. Then release the hook set button. Pull the line about 15cm. Press the line against the rear side of the body. thread the line through the slit from the rear side of the body. Tread the line up to the projection of the line holder. Taking the line from the rear side and placing it on the slider, along the right side of the hook. Be accurate. As leaving too much or too little line may result in an incorrect knot. Leaving about 3-5 cm. Press the swith in