BA Tube.doc

BA tube Ultra-high purity seamless stainless tubing _____Bright Annealing tubing Size： 1/4〞×0.035〞；3/8〞×0.035〞； 1/2〞×0.049〞；5/8〞×0.065〞 Material ：SUS304/316L Key point： Inside roughness Ra≤0.6， hardness HV≤90 Use： Clean room ? Diameter Thickness Strightness degree Length Rounghness O.D I.D Out Inner Range Φ3～Φ38 Φ1.8～ Φ36 0.2～8 0.2/1000 L≤6000 Ra≤0.6μm Ra≤0.4μm Tolerance ±0.025~±0.20 ±0.025～ ±0.20 ±0.01～ ±0.20 Main process: 1 Cold rolling The diameter of tubing was reduced by 2－rolls and 3-rolls cold pilger mills,insuring the tolerence ±0.02 and the roughness ≤0.4μm. the other method is Drawing bench. 2 Annealing Bright Annealed with Hydrogen gas 3 cleaning Ultrasonic cleaning 4 Finished product Inspection: Eddy-current and water press Spectroscopic analyzer Hardne ss measure instrument Inter-granular corrosion testing apparatus Universal testing machine 5 Packing: Each tube shall be bagged and capped at each end of tube Company introduce Shanghai Chuangyue Precision Seamless Tube Co., Ltd. / Jiangsu Chuangyue Metal Industry Co., Ltd. has changed from SNMRI shanghai nonferrous metals research institute seamless tube branch . The whole area is 17000 m2 and the area of the production department reach up to 9000 m2 Our quality management system has conformity with GB/T19001-2000 idt ISO9001-2000.The quality control begin from the physicochemicdal analysis,go along with the punching temperature,raw material inspection ,cogging,annealing,2-roll or 3-roll pilger mill cold rolling,degrease cleaning,heat process of finished product,straightness process,nondestructive flaw detection,clean process,packing . The key process technic inlude multi-roll precision cold rolling,precise temperature controlled heat process, nondestructive flaw detection. We have established the New Product ResearchDevelopment Center combining with the Northwest Polytechnical University and Anhui University of Technology.