毕业设计（论文-基于PLC的多路抢答器控制系统设计.docVIP

湖州师范学院求真学院 毕 业 设 计（论文） 2010 届 题 目基于PLC的多路抢答器控制系统设计 专 业 电子信息科学与技术 学生姓名 学 号 指导教师 论文字数 14599 完成日期 2010年5月5日 湖州师范学院求真学院教务部印制 基于PLC的多路抢答器控制系统设计 摘 要：本次设计利用三菱FX2N系列PLC作为核心部件，完成一个八路抢答器控制系统的制作。该系统可供八个或八组分台选手同时抢答，总台掌握着启动/停止开关、抢答开始按钮、抢答复位按钮、主持人安静提示按钮和手动设置个分台计分按钮等，分台则具有一个抢答按钮。该系统由七段数码管显示倒计时、分台号、选手计分和当前时间、温度情况，并作为被控设备由PLC驱动。因为系统中有很多七段数码管，所以我运用了动态扫描的方法来减少端口数。有一个蜂鸣器提示抢答开始、抢答复位、回答超时、抢答违规、无人抢答和安静提示。有17个发光二极管，总台一个用来显示无人抢答和回答超时，每分台两个用来显示抢答成功和抢答违规。本次设计中，硬件电路设计使用AUTOCAD软件；使用GX Developer软件编写程序；利用GX Simulator仿真软件对八路抢答器进行各部分模块仿真，观察结果。 关键词： 八路抢答器，系统，动态扫描 PLC-based multi-Responder Control System Design Abstract：The design of the use of Mitsubishi FX2N Series PLC as a core component of this design to complete an eight-way control system for the production. The system components for eight or eight players in each group to answer at the same time Total station holds the start/stop switch, to answer in the start button, reset button to answer in the host prompts quiet buttons and manually set the scoring button sub-station and so on. Sub-station will have an answer in the button. The system consists of seven-segment LED display countdown, sub-station number, player points and the current time, temperature conditions, and as charged by the PLC-driven device. Because the system has a lot of seven-segment digital tube, so I used the dynamic scanning method to reduce the number of ports. There is a buzzer prompt to answer in the beginning, to answer in reset, the answer overtime, to answer in non-compliance, no one answer in his place and quiet Tips. There are 17 light-emitting diodes. with a total station 1 is used to display and answer no one to answer in overtime, each sub-units used to display the answer in his two successful and to answer in non-compliance. The design, the hardware circuit design usi