毕业设计（论文）-合页盖注塑模具设计.doc

PAGE III 摘要 注塑成型是利用塑料的可挤压性与可模塑性，首先将松散的粒状或粉状成型物料，加热熔融塑化，使之成为粘流状态熔体，然后在柱塞或螺杆的高压推动下，以很大的流速注射进入温度较低的闭合模具中，经过一段时间的保压冷却以后，开启模具便可以从模腔中脱出具有一定形状和尺寸的塑料制件。设计过程中主要包括了零件结构特点分析、零件材料的选择、浇注系统设计、冷却系统的设计及模架结构设计。 此次设计首先选择了塑件的材料，选取了合适的注塑机，接着确定了型腔数目和分型面，设计了模架的大小、浇注系统、导向机构、顶出机构、脱模系统、温度调节系统，最后进行了模具加工运动仿真。较好的达到了设计要求。 关键词： 注塑模具 加工工艺 模具设计 Abstract Injection molding is using plastic but extrusion molding availability, first will loose of granular or powder molding materials, heating molten plasticizing, make it become the sticky flow state in the plunger melt, and then the high pressure or screw rod, driven by a lot of velocity injection into the lower temperature closed mold, after a period of time after the pressure-keeping cooling, open mold can cavity in decent shape from certain shapes and sizes of plastic objects.The design process including analysis of structural features of parts, components materials selection, gating system design, cooling system design and mold design. In this design, first choose a plastic material chosen for the injection molding machine, and then determine the number and sub-surface cavity, the size of mold design, gating system, guides, stripping systems, the design process of going against system and temperature Conditioning systems，the mould processing movement simulation. The better to achieve the design requirements. Key words: injection mold;processing;mold design 目录 PAGE IV TOC \o 1-3 \h \u HYPERLINK \l _Toc8693 摘要 PAGEREF _Toc8693 I HYPERLINK \l _Toc20647 Abstract PAGEREF _Toc20647 II HYPERLINK \l _Toc5834 第1章 绪论 PAGEREF _Toc5834 1 HYPERLINK \l _Toc17064 1.1 塑料注射模具简介 PAGEREF _Toc17064 1 HYPERLINK \l _Toc9579 1.2 国内外注塑模具发展现状 PAGEREF _Toc9579 1 HYPERLINK \l _Toc20966 1.2.1 我国塑料模具发展现状 PAGEREF _Toc20966 1 HYPERLINK \l _Toc959 1.2.2 与国外先进水平的差距 PAGEREF _Toc959 1 HYPERLINK \l _Toc21037 1.3 模具制造技术未来发展目标 PAGEREF _Toc21037 2 HYPERLINK \l _Toc14952 1.4 本设计的研究目的和意义 PAGEREF _Toc14952 2 HYPERLINK \l _Toc18648 1.5 注塑模具设计总体思路 PAGEREF _Toc1