毕业设计（论文）-曲轴终锻模设计及其数控加工仿真.doc

PAGE 34 摘要 在科技突飞猛进的21世纪，越来越多的先进制造方法应用于传统加工工艺中，为机械领域的发展提供了新的方向。本文主要阐述了锻造模具的数控加工及其发展趋势，并简单介绍了锻造的生产过程以及发展方向。本文重点介绍了汽车发动机曲轴终锻模具的设计制造方法，以及各种软件在曲轴终锻模具设计和加工中的应用。首先利用CATIA软件对曲轴零件、锻件、锻造模块等进行实体建模，然后利用UG软件对模具型腔进行数控加工仿真，最后在AUTOCAD软件中生成曲轴二维零件图，锻件图，模块图和装配图。而对曲轴模腔的实体建模过程以及模腔的数控加工仿真过程做出的重点叙述，说明了CAD/CAM在现代制造业中的应用。 关键词：发动机曲轴 终锻模 数控加工仿真 Abstract In the 21st century of the technological advances, more and more advanced manufacturing methods used in traditional processing technology for the development of machinery provides a new direction. This article focuses on the forging die machining and trends, and briefly describes the forging of the production process and development. This article focuses on the automobile engine crankshaft forging die design and manufacture of the final approach, and a variety of software end of the crankshaft forging die design and processing of the application. Firstly, forging and CATIA software modeling module, and then the mold cavity using UG software for NC machining simulation, the last in the AUTOCAD software to generate two-dimensional parts and assembly drawings and so on. While the crankshaft bore cavity mold and mold the physical modeling simulation process chamber processing time and space to make the focus of narration, description of the CAD / CAM application in modern manufacturing. Keywords: Engine Crankshaft; Finish forging die; NC machining simulation 目录 TOC \o 1-3 \h \z \u HYPERLINK \l _Toc296002262 摘要 PAGEREF _Toc296002262 \h I HYPERLINK \l _Toc296002263 Abstract PAGEREF _Toc296002263 \h II HYPERLINK \l _Toc296002264 目录 PAGEREF _Toc296002264 \h I HYPERLINK \l _Toc296002265 第1章 绪论 PAGEREF _Toc296002265 \h 1 HYPERLINK \l _Toc296002266 1.1概述 PAGEREF _Toc296002266 \h 1 HYPERLINK \l _Toc296002267 1.2国内外曲轴加工技术的现状及发展 PAGEREF _Toc296002267 \h 1 HYPERLINK \l _Toc296002268 1.2.1国内外曲轴加工技术的现状 PAGEREF _Toc296002268 \h 1 HYPERLINK \l _Toc296002269 1.2.2 国内外曲轴加工技术展望 PAGEREF _Toc296002269 \h 3 HYPERLINK \l _Toc296002270 1.3 本课题研究的目的