毕业设计（论文）-主井矿井提升选型设计.docVIP

摘 要 矿井提升需要用一些专用的提升设备，主要有提升容器，提升钢丝绳，提升机，井架，装卸载设备以及一些辅助设备。矿井提升设备是矿山较复杂而庞大的机电设备，它不仅承担物料的提升与下放任务，同时还上下人员。矿井运输是煤炭生产过程的一部分，煤炭的井工生产中，运输线路长，巷道条件多种多样，运输若不畅通，采掘工作就无法继续进行，井工生产的煤矿运输作业，包括从工作面到矿井地面的煤炭运输和辅助运输，辅助运输包括矸石、材料、设备和人员运输。　　本书分三章就以上几种设备的选型计算方法进行系统论述。 第一章主要针对矿山提升设备进行一定的介绍和说明，各个提升机所涉及方面的简易概述。第二章主要根据第一章所介绍的设备进行详细的选型计算。其中包括提升容器的选择与确定、钢丝绳方面的选择与计算、提升机的选择计算、提升系统的确定、钢丝绳与提升机的校验以及电动机、电耗方面的计算。第三章粗略的说明了下矿井拖动装备的种类及性能。 关键字：箕斗 提升机 矿山设备Abstract With some special mine ascension requires ascension of equipment, basically have ascending vessel, rope, hoist, mast, loading and unloading equipment few auxiliary equipment. Mine elevator equipment is mine is more complex and huge electrical and mechanical equipment, it not only bears material of ascension and task, also placed and personnel. Mine transport is part of the process of coal production Wells, coal production, transportation line work long and tunnel conditions varied, transportation if not unblocked, mining work cannot continue production of coal mine, well work from transportation operations, including mining of coal mine ground to transport and auxiliary transport, auxiliary transportation including coal, materials, equipment and personnel transportation. Book points three chapters will the above several equipment selection calculation method are discussed systematically. The first chapter mainly for mining lifting equipment that perform some of the introduction and involved, each hoist of simple overview. The second chapter basically according to the first chapter introduces in detail the calculation of the selection of the equipment. Including the ascending vessel selection and determine, wire rope options and calculation, hoist choice calculation, improve the system determination, the hoist rope and the calibration and motor, power consumption aspects of computation. The third chapter rough illustrates the mine drag equipment under kinds and performance. Keywords: mining equipment skip hoist 目 录