F156B(M)401_An2.2_Mechanical Requirment机械要求.docVIP

EQUIPMENT DRIVERS 设备驱动 Gear Reducers 齿轮减速机 All speed reducers shall be in accordance with DIN 3990 or AGMA or ISO 6336 or GB/T 3480 standards and shall be air cooled unless otherwise approved in writing by Bosowa. 所有 All speed reducers shall be selected for motor speeds not to exceed 1500 rpm for 50 Hz motors. 所有减速机的选择都应只针对转速不超过1500 rpm 50Hz的电机。 Reducers shall include filtered air breather maximum 10 um and a magnetic drain plug. 减速机应配备带过滤功能（最大10 um）的吸湿器和一个电磁排污阀。 The gear reducers shall be designed for a lifetime of not less than 100,000 hours of operation. 齿轮减速机的设计使用寿命不得低于100,000小时。 All gear reducers shall have minimum mechanical rating of: ROLLER BEARINGS 滚柱轴承 Permanently greased roller bearings shall be sized for a theoretical lifetime of at least 100,000 hours. Roller bearings with re-lubrication facility or continuous oil lubrication shall be sized for a theoretical lifetime of at least 100,000 hours. 重复润滑滚柱轴承或持续稀油润滑的滚柱轴承的理论使用寿命至少应有100,000小时。 For plant items, which normally operate of one shift per day or only occasionally, the lifetime shall be at least 50,000 hours. 厂内通常每天每天只运行一班或只是偶尔运转的轴承，使用寿命至少应为50,000小时。 F156B.PT. SEMEN BOSOWA Maros Line 2Clinker Handling Jetty采购合同 F156B M 401