耐热套管.docVIP

PYROJACKET ? 耐 热 套 管 ● Withstands continuous exposure to 260℃ (500℉) ● Up to 1090℃ (2000℉) for 15~20 minutes ● Up to 1650℃ (3000℉) for 15~30 seconds ● Size:1/4”(6mm) ~ 5”(127mm) ● Thermal conductivity (K-Factor): Industrial grade K=0.541 BTU-in./hr-ft2-℉ Aerostyle grade K=0.610 BTU-in./hr-ft2-℉ ● Electrical insulation capacity (Dielectric breakdown voltage): Average Dielectric Breakdown Voltage 7.3kV Min. Dielectric Breakdown Voltage 5.0kV Max. Dielectric Breakdown Voltage 10.0kV ● Characteristic: greaseproof, waterproof, excellent modulus of elasticity resists molten metal splash ● 承受持续温度：260℃ (500℉) ● 承受 1090℃ (2000℉) 约 15~20 分钟 ● 承受瞬间 1650℃ (3000℉) 约 15~30 秒 ● 尺寸：1/4 英吋 (6 公厘) ~ 5 英吋 (127 公厘) ● 导热系数(K-Factor)： 一般工业品级 K=0.541 BTU-in./hr-ft2-℉ 航天工业品级 K=0.610 BTU-in./hr-ft2-℉ ● 绝缘性能 (电介质破坏电压数)： 平均值：7.3kV；最小值 5.0kV；最大值 10.0kV ● 特点：防油、防水、阻挡熔铁喷溅. 联系方式 QQ:434598449  PYROJACKET ? 耐 热 套 管 Constructed from a high bulk fiberglass sleeve heavily coated with iron oxide red silicone rubber, Pyrojacket sheds molten metal splash and withstands intense heat and flame, making it ideal for protecting hoses, cable and tubing in a variety of hostile environments. Withstands continuous exposure to 500℉ (260℃), up to 2000 ℉ (1090℃) for 15-20 minutes, and up to 3000℉ (1650℃) for 15-30 seconds. 以高膨松性玻璃纤维之套管所制成，并覆以厚实的氧化铁红硅胶，耐热套管能阻挡熔铁喷溅， 且不受高温和火焰所损坏，这些性质使其适用于保护恶劣环境下的软管、缆线和管路。耐热 套管可连续暴露于 500°F (260°C)的高温中而不受损坏，高达 2000°F (1090°C)的温度下可承 受 15-20 分钟，3000°F (1650°C)的温度下则可承受 15-30 秒。 Available in size up to 5” (127mm) diameter, Pyrojacket has an excellent modulus of elasticity and can be used to bundle hoses and cables. 耐热套管尺寸齐全，最大直径达 5 英吋 (127 公厘)，且拥有绝佳的延展系数，极适合用于包 覆软管和缆线。 Pyrojacket’s insulation properties al