毕业论文-盒型输出研究.docxVIP

摘要随着一系列通信的实际应用需求的增长，毫米波真空器件得到了大范围的应用。而在各类毫米波真空器件中大多采用以波导为接口的输出窗结构。输出窗的作用是隔绝真空器件内部的真空和大气的连接，但不妨碍微波功率的传输，这就要求输出窗的设计必须满足一定的能量传输要求。在窗内要求有最小的反射或损耗，因此要求输出窗匹配良好，工作频带宽，功率容量大，并且在一定频宽内其|S21|db-0.3。根据这要求设计满足条件的输出窗，不断改变其参数设置，进行多次仿真找到符合条件的输出窗模型。微波仿真软件CST为德国CST公司开发的高级无源滤波器件及天线仿真软件包，能仿真多种微波真空器件，给出S等参量。本课程设计以CST软件为基础，设计理想模型并仿真，最后得出理想模型的尺寸与仿真参数。关键字：盒型窗,太赫兹输出窗，非常规输出窗,CST软件仿真ABSTRACTAs the growth of the practical application of a series of communications needs, millimeter-wave vacuum device has been a wide range of applications. And mostly used in all kinds of millimeter-wave vacuum device waveguide was favorable for the formation of the interface window of transmitting energy. Output window is used to isolate vacuum device inside the vacuum and atmospheric connection, but dont get in the way of microwave power transmission, which requires the output window design must satisfy certain energy transmission requirements. Requires minimal reflection or loss within the window, so the required output window matching is good, wide working frequency band, large capacity, power and the standing wave ratio within a certain bandwidth, |S21|db-0.3.According to these design satisfies the requirement of the output window, change the parameter Settings, multiple simulation find qualified model of the output window.CST microwave simulation software CST for Germany company to develop advanced passive filter and antenna simulation software package that can simulate a variety of microwave vacuum devices, S and other parameters are given.This course design based on the CST software, design the ideal model and simulation, and finally concludes that the size of the ideal model and simulation parameters.Key Words: Window box model design, Output Window Of THz, Irregular Type Window. CST目录第一章引言11.1课题背景11.2盒型输出窗研究现状11.3研究输出窗的目的和意义41.4课题的内容4第2章盒型输出窗的理论分析62.1引言62.2常规盒型输出窗等效电路理论分析62.3盒型输出窗的设计步骤13第3章盒型输出窗的模拟计算与分析143.1常规盒型输出窗的设计143.1.1基本参数的确定153.1.1.1 矩形波导尺寸153.1.1.2窗片尺寸153.1.1.3圆波导尺寸163.1.2 CST模型优化173.1.3 结果分析讨