2016年LTE网络基本信令新手详解.ppt

* * * * * * * * * The MME creates a UE context when a UE is turned on and attaches to the network. It assigns a unique short temporary identity termed the SAE-Temporary Mobile Subscriber Identity (S-TMSI) to the UE which identifies the UE context in the MME. This UE context holds user subscription information downloaded from the HSS. The local storage of subscription data in the MME allows faster execution of procedures such as bearer establishment since it removes the need to consult the HSS every time. In addition, the UE context also holds dynamic information such as the list of bearers that are established and the terminal capabilities. * The security functions include: - Guards against unauthorised EPS service usage (authentication of the UE by the network and service request validation). - Provision of user identity confidentiality (temporary identification and ciphering). - Provision of user data and signalling confidentiality (ciphering). - Provision of origin authentication of signalling data (integrity protection). Authentication of the network by the UE. There are two different levels of the security associations between the UE and the network. i) RRC and UP security association is between the UE and eUTRAN. The RRC security associations protect the RRC signalling between the UE and eUTRAN (integrity protection and ciphering). The UP security association is also between the UE and eUTRAN and provide user plane encryption function. ii) NAS security association is between the UE and the MME. It provides integrity protection and encryption of NAS signalling * 此RRC连接重配置用于配置SRB2和默认承载DRB1 * * 2. NAS message: example, in attach procedure, NAS message such as identity request/response. * * * * * * 4.源eNB向MME发送HANDOVER REQUIRED消息，消息中携带切换需要用到的信息（MME UE S1AP ID、eNB UE S1AP ID、Handover Type（设置为IntraLTE）、Cause、Source ID、Target ID、Intra-LTE HO Information ListRequest（Source eNodeB to Target eNodeB Transparent Container）等）。如果本流程属于不同MME下两个eNB之间的切换，则该消息可以通过MME侧的路由功能被