Constuction grout.docVIP

SECTION 03 61 00 CONSTRUCTION GROUT Note to specifiers: The purpose of this guide specification is to assist the specifier in developing a project specification for the use of BASF building systems products. this guide document has been prepared to be part of a complete project manual. it is not intended to be a “stand alone” document, and it is not intended to be copied directly into a project manual. This guide specification will need to be carefully reviewed for APPROPRIATENESS for the given project and edited accordingly to comply with project-specific requirements. GENERAL SUMMARY Section Includes: Application of non-catalyzed, multi-purpose construction grout containing mineral aggregate. Delete sections below not relevant to this project; add others as required. Related Sections: Section 03 30 00 – Cast-In-Place Concrete. Section 03 45 00 – Precast Architectural Concrete. Section 05 12 00 – Structural Steel Framing. Section 05 50 00 – Metal Fabrications. Section 03 41 00 – Shoring and Underpinning. system description Performance Requirements: Provide grout material complying with the following requirements: Flow: 126 percent to 145 percent, per ASTM C230 at 5 drops. Volume Change, flowable consistency after 28 days: 0.08 percent, per ASTM C1090. Compressive Strength – Flowable consistency, ASTM C942, per ASTM C1107: 1 Day: 1,500 psi 10 MPa . 3 Days: 5,000 psi 34.5 MPa . 7 Days: 6,000 psi 41.3 MPa . 28 Days: 7,000 psi 58.6 MPa . SUBMITTALS Comply with Section [01 33 00] [ __ __ __ ]. Product Data: Submit manufacturers technical bulletins and MSDS on each product. Submit list of project references as documented in this Specification under Quality Assurance Article. Include contact name and phone number of person charged with oversight of each project. Quality Control Submittals: Provide protection plan of surrounding areas and non-cementitious surfaces. QUALITY ASSURANCE Comply with Section [01 40 00] [ __ __ __ ]. Qualifications: Applicator: Mi