绿固产品目录LM 600 2BF.docVIP

感光型防焊阻劑 LM-600-2BF Liquid Photo- imaginable Solder Mask LM-600 2BF為一種接觸曝光鹼液顯影型之防焊阻劑，為一性能優異的網印印刷油墨，顯影後忠於底片具有高度之解像力。此二液型感光防焊阻劑經高溫後硬化之塗膜具高絕緣性及高耐焊性，產品性質優越，適用於PCB精密製造。 LM-600 2BFseries are screen-printing contact exposure type photo-imaginable mask designed for printed circuit fabrication. It has sharp pattern，high resolution，high color stability for long baking time at high temperature and excellent electric properties. Also has fast curing speed, excellent printing properties and forming a tough protective film with excellent solder resist properties after post-curing for the production of PCB which require fine pattern with high density packaging. 技術資料Technical Data 1. 特 性 FEATURES LM-600 2BF 顏色 Color 全黑光澤色 不揮發性 Solid content 75 ± 2 % 黏度 25℃ Viscosity at 25 oC VT-04, #2針, #2 Spindle A劑 Component A :200±30PS B劑 Component B : 120±30PS 硬化條件 Curing Condition 紫外線曝光加熱後硬化 UV Exposure and thermal curing 絕緣Electric properties A 誘 電 率：0.04 B 絕緣破壞值：2.7KV/㎝ 耐焊錫性 Resistance to molten solder 260±5 ℃ , 10秒seconds, ≧3次 鉛筆硬化 JIS K5400 Film hardness by pencil lead ≧6H 密著性 JIS D0202 Adhesion 100/100 貯存安定性 Shelf life at 20-30 ℃ under dark packing 6個月 month 2. 作業流程 Operation conditions 電路基板前處理Pretreatment for PCBs 清刷、酸處理、水洗Buff, Acid Cleaning and Washing 主劑加硬化劑混合 70 wt % A + 30 wt % B 塗佈Coating 網印Screen Printing 36T、40T、43T 預熱乾燥Preheat drying 單面印刷75℃約 20 ~ 30分鐘 雙面印刷75℃約 45 ~ 60分鐘 Single layer heating at 75 oC about 20~30 minutes Double layer heating at 75 oC about 45~60 minutes 曝光條件UV Exposure 約550 ~ 700 mJ/cm2 依21格黑白底片曝至6-8格滿 顯影條件 Imaging conditions 60~90秒在30±2 oC 的1~2%碳酸鈉水溶液，水壓1.5~2.0 60-90seconds at 30±2oC for 1-2 % Na2CO3aqueous solution 洗淨Cleaning 水洗壓力Water pressure：2.0 ~ 2.5㎏/㎝2 後硬化Post curing 150℃×60分鐘minutes 以上各項數據僅供參考 The above information is for reference only. 2 1