CONTROL_SYSTEM.docVIP

CONTROL SYSTEM OBJECTIVE TYPE QUESTIONS 1. The temperature control system in the human body is an example of a closed-loop control system. a) True b) False 2. In a temperature control system, what represents the output of the system? a) The required temperature. b) The actual temperature achieved. c) The heat produced by the system. d) The heating element. 3. What is the voltage gain of the following arrangement? a) (1+AB)/B b) B/ (1+AB) c) (1+AB)/A d) A/ (1+AB) 4. Under what conditions does the gain of a feedback system approximate to 1/B? a) The loop gain AB 1. b) The feedback path gain B 1. c) The forward path gain A 1. d) The loop gain AB 1. 5. What is the gain of the following passive attenuator? a) 0.1 b) 0.11 c) 9 d) 10 6. What is the effect of negative feedback on the gain of an amplifier? a) It reduces the gain by a factor of (1 + AB). b) It reduces the gain by a factor of 1/B. c) It increases the gain by a factor of 1/B. d) It increases the gain by a factor of (1 + AB). 7. What is the effect of negative feedback on the bandwidth of an amplifier? a) It reduces the bandwidth, often by a factor of (1 + AB). b) It reduces the bandwidth, often by a factor of 1/B. c) It increases the bandwidth, often by a factor of (1 + AB). d) It increases the bandwidth, often by a factor of 1/B. 8) What are the effects of negative feedback on the input and output resistance of an amplifier? a) It increases input resistance and decreases output resistance. b) It can either increase or decrease the input and output resistance depending on how it is applied. c) It decreases input resistance and increases output resistance. d) It increases both input and output resistance. 9) Negative feedback reduces the noise corrupting a signal by a factor of (1 + AB). a) True b) False 10. The diagram below shows a closed-loop control system. What element is represented by the circle labeled X? a) The error signal. b) The goal. c)) The user d)