EP1760_EC_200907.docVIP

Korepox Primer EP1760 双组份 Two-Component Product Description 产品描述 A two-component, modified polyamide cured epoxy primer with high content of zinc phosphate as corrosion inhibiting pigment. It can be applied to non-ferrous metal surfaces which are impossible to do blast cleaning prior to application. It forms a hard and tough film with excellent adhesion property, abrasion resistance and impact resistance. EP1760 是一种双组份改性聚酰胺环氧树脂漆可适用于不能进行喷砂处理的会形成一层坚硬的漆膜有很好的黏附性耐磨性和耐冲击性 Recommended Use 推荐用途 Generally applied as a multipurpose primer for steel surfaces or non-ferrous metal surfaces like aluminum and stainless steel SUS in moderately or severely corrosive condition, interior and exterior including coastal and marine environments. As a specially designed a multipurpose primer for non-ferrous metal including steel surfaces of the vessels and/or engine room inside area which is composed of various substrates and various finish coats in moderately or severely corrosive atmosphere. It can be applied as a primer by solvent cleaning without blast cleaning. 作为一种多功能底漆用于中度或重度腐蚀环境钢表面或表面它可作为溶剂清理后施工的底漆而无需进行喷砂处理 Physical Properties 物理特性 Finish and Color 外观及颜色 Flat. Grey 1135 , Ivory 3332 . 平光. 灰色 1135 , 象牙色 3332 . Drying Time 干燥时间 Substrate temperature 底材温度 5℃/41℉ 20℃/68℉ 30℃/86℉ Set to touch 指触干 1 Hour 30 Min. 20 Min. Dry through 硬干 20 Hours 4 Hours 2.5 Hours * The actual drying time is subject to the film thickness, ventilation, humidity etc., and drying time under other temperature conditions should be checked and informed by KCC. * 实际干燥时间随着涂膜厚度, 环境通风程度和湿度而不同, 其他温度条件下的干燥时间请咨询 KCC. Solids by Volume 固体含量体积比 Approx. 65% Determined by ISO 3233 约 65% 按ISO 3233测定 Theoretical Spreading Rate 理论涂布率 6.5㎡/L in 100? dry film thickness on a smooth surface. 光滑表面上, 干膜厚度100?时, 则理论涂布率为6.5㎡/L. Specific Gravity 比重 Approx. 1.5 for Mixture of Base and Curing agent. 约1.5 Flash Point 闪点 Base [ EP1760 PTA ] : 26℃/79℉ Closed cup Curing Agent [ EP1760 PTB ] : 26