数电多功能时钟课设.docVIP

  • 41
  • 0
  • 约7.71千字
  • 约 19页
  • 2016-08-25 发布于河南
  • 举报
数电多功能时钟课设

Liaoning Normal University 2008级 开放试验项目研究论文 摘要: 这份设计报告主要介绍了一种用NE555产生脉冲信号,以74LS192为主体,以数码管为显示器件的数字钟电路的设计。数字时钟用NE555产生脉冲信号,频率为1Hz。其主体分三个部分,计时电路、校时电路、报时电路。计时电路以数字形式显示时、分、秒,其中秒和分为60进制,时为12进制,校时电路可对分和时进行校时。蜂鸣器每一个整点报时。显示电路用74LS48和共阴极数码管来实现。 关键字: 数字时钟;计时;校时;报时 Abstract: This design reports mainly introduces a kind of NE555 produced by pulse signal to 74LS192 as main body, digital display device, pipe for the digital clock circuit design. Digital clock pulse signal with NE555 produce, frequency for 1Hz. The main body of the three parts and timing circuits, reset circuit, chim

文档评论(0)

1亿VIP精品文档

相关文档