数码管电子钟设计及实现.docVIP

编号：201234140115 本科毕业设计 数码管电子钟的设计及实现 院 系：信息工程学院 姓 名： 学 号：0835140115 专 业：通信工程 年 级：2008级 指导教师： 职 称： 完成日期：2012年5月 摘 要 电子钟主要是利用电子技术将时钟电子化、数字化，拥有时钟精确、体积小、可拓展性能强等特点，被广泛用于生活和工作中去。 本文主要为实现一款可正常显示时间、带有24h/12h制调整、带有AM/PM显示以及时间校准功能的一款基于单片机仿真的多功能电子钟。 本文对设计要求的功能进行了分析和比较，确定了提供电源、界面显示、输入等方案。本设计采用AT80C51芯片作为核心，以时钟电路、复位电路为辅助电路，用Proteus软件自带的电子钟组件实现高度仿真的显示结果。软件部分主要采用简单且应用广泛的C51语言编写实现。这种仿真的电子钟具有电路简单、读取方便、显示直观、功能多样、时间精度较高、操作简单、编程容易、成本低廉等很多优点。 设计主要是用Proteus电路软件实现电子管的仿真。经过改装，添加部分功能所生产出的产品即可应用于一般的生活和工作中，从而给人们的生活和生产带来便利，符合电子仪器仪表的发展趋势，具有广阔的市场前景。 关键词：单片机；电子钟；控制器 Abstract Electronic clock is the use of electronic technology to make clock electronic and digital. With a precise clock, small size and can be able to develop strong performance characteristics, so are widely used to live and work. In this paper, to achieve a normal display time with 24h/12h system adjustments, with the AM/PM display and time calibration function of a simulation based on single chip multi-function electronic clock. In his paper the design requirements of the function are analyzed and compared, determined to provide power, interface display, input program. This design adopts AT80C51 chip as the core, with a clock circuit, reset circuit, using Proteus Software comes with the electronic clock assembly to achieve a high degree of simulation result. Software part mainly uses a wide range of C51 language. This simulation electronic clock has the advantages of simple circuit, convenient reading, visual display, multiple functions, high precision ,simple operation, time programming is easy, low cost and many other advantages. The design is mainly use Proteus software to realize the electronic tube simulation circuit. After modification, adding some functions to produce products that can be applied to people’s life and production,in line with the development trend of electronic instrumentation, and has broad market prospects. Keywords:SCM;electronic clock;controller 目 录 1