随钻震击器 扶正器.docVIP

JSZ型机械式随钻震击器 JSZ型是目前长度较短的上、下震击作用为一体的机械式随钻震击器。它减小了井下挠曲交变应力的危害，在使用中更为安全可靠，在海洋钻井和定向钻井中更显优势。 Model JSZ Mechanical Drilling Jar Model JSZ Mechanical Drilling Jar integrates the up jarring with the down jarring, with a shorter length at present. It can reduce the harmfulness from the flexural stress in downhole operation. So it is more safe and reliable, and is superior in sea drilling and directional drilling. 型号 TYPE O.D. Mm I.D. mm Connection API Upward jarring stroke mm 下击行程 Downward jarring stroke mm 最大上震击力 Max. Upward Jarring force kN 最大下震击力 Max. Downward jarring force kN 总长 Overall length mm JSZ159 159 （6 1/4″） 63.5 NC50 227 152 630 360 4 223 JSZ203 203（8″） 71 65/8REG 232 226 820 460 4 904 According to customer requirements We can design and manufacture other serial specification products. YSZ型液压随钻震击器 YSZ型液压随钻震击器属整体式随钻震击器，上击采用液压阻尼贮能释放机构，可由提拉速度的变化获得不同的上击吨位。下击为自由落体，其震击力的大小由震击器以上钻具的重量决定。 连接于正常钻井的钻具组合中，钻进过程中钻具遇卡时，可以立即启动进行上击或下击。 可用于中途测试和打捞作业，代替打捞震击器。 Model YSZ Hydromechanical Drilling Jar It belongs to the integral drilling jar. Up jar is designed on hydromechanical principle—“hydraulic pressure → obstruct → energy storage → elease” — and has different tonnages by changing the lifting speed. The action of down jarring is just as a free falling body and the jarring impact is based on the drilling tool’s weight above the drilling jar. Connecting with the drilling tool unite, it can start immediately to carry out up jar or down jar when drilling tool stuck during drilling. Can be used to drill stem test DST and fishing operation, replace fishing jar. 型号 TYPE 外径 O.D. mm 水眼 I.D. mm 接头螺纹 Connection API 闭合总长 Closed overall length mm 拉开行程 Draw-out stroke mm 最大工作扭矩 Max. Working torque kN·m 最大抗拉负荷 Max. Tensile load kN 最大震击力 Max. Jarring load kN 出厂震击力 Ex-plant load kN YSZ121 121 50 NC38 5 757 650 13 1 400 300 200 YSZ159 159 57 NC50 6 435 700 15 2 000 700 350 YSZ178 178 60 NC50 6 425 700 15 2 000 700 350 YSZ203 203 70 65/8REG 6 646 700 18 2 300 800 450 我厂可按用户要求设计