镍氢电池规格AA-1500mAH.docVIP

SCOPE This specification provides engineering information of both electrical and mechanical requirement. CELL AND TYPE 2.1 Type ：Ni-MH Battery 2.2 Model ：LH-150AAH 2.3 Size ：AA SPECIFICATION DIMENSIONS： As per attached drawing. Drawing Number： PACK RATING 4.1 Nominal Voltage 1.2V/Cell 4.2 Rated Capacity 1500mAh/0.2C 4.3 Discharge End Voltage 1.0V/cell 4.4 Rate Charge 0.1C(charged for 15 hours) 4.5 Fast Charge 1C(charged for 1.25 hours) 4.6 Trickle Charge 0.01C~0.05C 4.7 Temperature (recommended) Standard Charge 0~45℃ Trickle Charge -10~45℃ Discharge -10~60℃ Storage -20~40℃(within 6 months) 4.8 Maximum Discharge Current： (continued) 4500mA BATTERY PERFORMANCE Test Conditions： The test is carried out with new battery. Unless otherwise stated, tests should be down within one month of delivery after testing with method of rated capacity which be listed on the following performance chart. Ambient Conditions： Ambient Temperature：20±5℃ Relative Humidity：65±20% Rated Charge/Discharge Conditions： Charge：150mA(0.1C) for 16 hours Discharge：300mA(0.2C) to 1.0V/cell, after standard charge 60 minutes. Performance And Quality Assurance： TEST UNIT SPECIFICATION CONDITION REMARKS Capacity mAh ≧100% Standard charge and discharge Allow 3 cycles Open current voltage V/cell ≧1.24 Test within 14 days after standard charge and storage at 20℃ Internal resistance mΩ/cell ≦40 Fully charge at 20℃(1KHZ) Quick discharge min Discharge time≧54 Standard charge, Rest 60min Dis charge to 1.0V/cell at 1C Allow 3 cycles Charge at high temperature mAh Discharge capacity≧80% nominal 1C charge to –ΔV=5mV/cell at 40℃ Standard discharge at 20℃ Discharge at lower temperature mAh Discharge capacity≧60% nominal Standard charge at 20℃ 0.5C discharge to 1.0V/cell at 0℃ Over Charge No rupture Charge：5 hours at 1C Over Discharge No rupture Discharge ：8 hours at 12Ω Storage performance mAh Discharge capacity ≧60% n