GetData 图数字化仪使用方法.docVIP

GetData Graph Digitizer用法 GetData Graph Digitizer 2.22 Quick Start Step 1 Step 2 Open image file (File=Open Image). Set the scale by setting four points Xmin, Xmax, Ymin and Ymax, and by assigning logical coordinates to these points (Xmin value, etc.). To set the scale use Operations=Set the scale menu or context menu (right mouse button). Picture below illustrates how Xmin, Xmax, etc., can be set in the case of sample graph. Xmin and Xmax are assigned values 20 and 80 respectively, Ymin and Ymax are assigned values 1e+14 and 1e+15. The scale is logarithmic along Y axis, this can be set in Adjust scale window under Operations=Adjust scale menu. Step 3 Digitize graph. Automatically digitize, using one of the two methods. 1) Operations=Auto trace lines. Choose starting point by clicking left mouse button, or right mouse button to additionally choose direction for line tracing. The same can be done through context menu (Auto trace lines item). 2) Operations=Digitize area. First you will be asked to set grid type, distance between grid lines, and other options. Then choose the area to digitize by holding left mouse button and dragging the grid (in case of rectangular grid hold down Shift to rotate the grid). You can move the grid by holding down Ctrl. Manually digitize, using point capture mode (Operations=Point capture mode). In this mode data points can be also moved; to move a point first select it with right mouse button, and then set it at a new location by left button. Data points can be also set by double clicking left mouse button in Magnifier window, or Shift + clicking in main window or in Magnifier window. To remove points it is convenient to use eraser tool (Operations=Data points eraser). Step 4 Copy obtained data to the clipboard (File=Copy data to buffer or Ctrl+Alt+C) or export to one of the following formats: TXT, XLS, XML, DXF or EPS (File=Export data). Data can also be copied to buffer directly from Information window (Ctrl+C or Ctrl+INS). Settings f