CAR PARKING SENSOR说明书004款.docVIP

CAR PARKING SENSOR INTRODUCTION Car parking sensor consists of ultrasonic sensors, digital control box, camera and TFT/LCD display. This system detects the distance between the car and the back obstruction with ultrasonic sensors installed at the rear bumper of car. The obstruction image will be shown via the camera. With the change of alarm sound, detect the safe area correctly. It is best choice for the safe of your car. MAIN FEATURES ·Colorful TFT monitor to show the back image ·Numeric distance display ·Simulate obstruction to indicate the direction ·Ten-stage simulate obstruction to show the distance ·Bi Bi Bi alarm sound ·2 or 4 sensors for option ·Various types of sensor for option ·Various displays for option ·Various angle of sensor for option TECHNICAL SPECIFICATION ·Rated voltage:12V ·Operating voltage: 10.5 ~ 16V DC ·Rated current: 40mA ~ 300mA ·Detection distance: 0.3 ~ 1.5m ·Ultrasonic frequency: 40KHz ·Working temperature of control box: -30~+80℃ ·Display working temperature:0~60℃ ·Display: TFT/LCD display ULTRASONIC DECTECTABLE VIEW ANGLE OF CAMERA ALARM MODE Stages Distance Awareness Alarm sound Number color Bars 1 150cm Safe Area Silcence White No bars 2 100-150cm Safe Area Bi.....Bi..... 1.0-1.5 White 1-6 3 70-90cm Alert Area Bi...Bi... 0.7-0.9 White 7-9 4 50-60cm Alert Area Bi...Bi... 0.5-0.6 White 10 5 0-40cm Dangerous Area Bi Bi Bi....... 0.0;0.4 White 10 DISPLAY STATUS Safe Area 100-150cm Dang....Dang.... Alert Area 50-90cm Dang....Dang... Dangerous Area 0-40cm DangDang....... SENSOR INSTALLATION Be sure no other parts of the vehicle falls into the detecting range of the sensors so as to avoid false detection. The best position for 2 sensors The best position for 4 sensors Install the insert-in sensor The direction of sensors Insert-in Insert-in Stick-on Stick-on and Insert-in sensors in various shapes for option Note: The 3M double paste