6410裸机中断独立完整程序.docVIP

//Tiny6410的裸机中断码，所有的代码都贴在后面，没有不相关的东西，按1~3键led作相//应的改变，大部分码来自网络,FirendARM Tiny6410 1110的板亲测可用. //目的：用来玩滴 //---------------------------------------------------------------------------- //Startup.s文件，目的：开总中断并跳到main函数 //---------------------------------------------------------------------------- IMPORT _main AREA |C$$code|,CODE,READONLY global Start Start ;开总中断 mrc p15,0,r0,c1,c0,0 orr r0,r0,#(124) mcr p15,0,r0,c1,c0,0 b _main ;跳到main函数 DCB LED AND KEY END //------------------------------------------------------------- //main.c文件 //------------------------------------------------------------- #include Tiny6410_Led.h #include Tiny6410_Interrupt.h #include Tiny6410_GPIO.h static void delay()//延时一会儿 { unsigned int i=0; while(i3500000) i++; } //初始化按键,使能按键中断 void initKey(void) { rGPNCON = rGPNCON ~(0xffff 0) | (0xaaaa 0);//eint rEINT0CON0 = rEINT0CON0 | (0x22 0);//both edge rEINT0MASK = rEINT0MASK ~(0xf); } //响应中断的函数 void isrKey(void) __irq { if(rEINT0PEND0x1)//按1键时led全亮 { ledDisplay(0x0); } if(rEINT0PEND0x02) { ledDisplay(0x02); } if(rEINT0PEND0x04) { ledDisplay(0x03); } if(rEINT0PEND0x08) { ledDisplay(0xf); } delay(); delay(); delay(); rEINT0PEND |= 0x18003f; //清状态 clearVectAddr(); return ; } void _main() { initIntc();//初始化中断 initKey();//初始化按键 setIntcIsr(0,isrKey);//注册中断函数 enableIntc(0);//开中断0 while(1)//等中断 { ; } } //------------------------------------------- //Tiny6410_Interrupt.c文件 //--------------------------------------------- #include Tiny6410_GPIO.h #include Tiny6410_Interrupt.h //--------------------------------- //用于初始化中断 //--------------------------------- void initIntc(void) { //先关所有中断 rVIC0INTENCLEAR=0xffffffff; rVIC1INTENCLEAR=0xffffffff; //模式设成IRC rVIC0INTSELECT=0x0; rVIC1INTSELECT=0x0; //清中断位 clearVectAddr(); } //--------------------------------- //清中断指示 //--------------------------------- void clearVectAddr(void) { rVIC0ADDRRESS=0x9; rVIC1ADDRRESS=0x9; return ; } //-