ResponseSimRandom.doc

NX 5 Response Analysis Random Response Analysis of Fender This workshop demonstrates NX 5 Response Analysis capability for analyzing the dynamic response of a motorcycle fender. A Power Spectral Density (PSD) random excitation will be defined in the Function Toolkit. 这个范例将通过一个摩托车挡泥板的动力响应分析来证明NX5的响应分析的能力,我用使用函数工具栏来定义一个PSD(功率谱密度)的随机激励 This PSD acceleration function will be applied in the workshop as enforced motion loading on the fender at the connection to the fork. We want to evaluate the dynamic displacements and stresses in the fender. 这个PSD的加速度函数讲被添加到挡泥板和前叉的连接处作为作为强迫运动的载荷,我们讲评估挡泥板的动态位移和应力. The PSD excitation will also be converted to a transient excitation and the solution re-solved in the time domain. Conversion to time domain is useful if one wants to perform a fatigue analysis of what is an inherently random loading since most fatigue software operates on time domain data. Also if frequency loads (such as from an engine), and random loads (such as from road input), occur at the same time, it is not possible to combine them in the frequency domain, but you can in the time domain. 这个PSD激励讲同事被转换城一个瞬态激励在时间范围内重新解算,转换成时间范围将更有利于我们完成一个拥有固有随机载荷的疲劳分析,当然大部分的疲劳软件都在时间范围内起作用,如果频率载荷和随机载荷出现在相同的时间,是不可能合并他们的频率范围,但是我们可以合并时间范围. Steps of Workshop: Set Role Open .prt file Create a fem Generate a Mesh Create a simulation Define boundary conditions Define solver parameters Solve for Modes Using NX Nastran Solver Post Process the Results to View the Mode Shapes Create Response Simulation Define Random Excitation Function Create Response Simulation Event for a Random Excitation Compute Response Functions for the Random Event Compute Full Field Response for the Random Event Convert PSD excitation to Transient Create Response Simulation Event for Transient Excitation Compute Response Functions for the Transient Event Convert Transient Results to PSD Compare PSD event Results to Transient Results Set Role Start NX 5. Select the ‘Roles’ tab on the resource bar ().