基于DYNAFOM的板料成形研究.docVIP

基于DYNAFORM的板料成研究 摘要 在拉深成的过程中，零件容易出现开裂，起皱等问题。针对这些问题，用PRO/ENGINEER软件将零件进行三维建模，导入DYNAFORM，进行初步模拟，设置模拟控制参数，主要是修改板料厚度、板料性能、冲压速度、模具圆角半径等参数。找出模具倒角、材料厚度、冲压速度对材料成形性能的影响，从而对于指导成形工艺的设计具有重要的意义。 关键词：DYNAFORM，拉深，模拟，参数 Based on the dynaform plate forming research Abstract：Deep drawing of sheet metal industry is now an important processing method. In the drawing forming process, the parts prone to cracking, wrinkling and other problems. Along with the computer simulation and the simulation technology development, the process of sheet forming analysis, defects distribution problems can b