有关焊条专业英语.docVIP

有关焊条专业英语 跟焊条有关的专业英语``````量多给点```3Q 浏览次数：1303次悬赏分：10 | 解决时间：2008-7-15 10:12 | 提问者：boyzhang1988 大家帮我下`问题补充： 最佳答案 焊接热循环 weld thermal cycle 焊接温度场 field of weld temperature; weld temperature field 准稳定温度场 quasi-stationary temperature field 焊接热源 welding heat source 点热源 point heat source 线热源 linear heat source 面热源 plane heat source 瞬时集中热源 instantaneous concentration heat source 热效率 thermal efficiency 热能集中系数 coefficient of heat flow concentration 峰值温度 peak temperature 瞬时冷却速度 momentary cooling rate 冷却时间 cooling time 置换氧化 substitutionary oxydation 扩散氧化 diffusible oxydation 脱氧 desoxydation 先期脱氧 precedent desoxydation 扩散脱氧 diffusible desoxydation 沉淀脱氧 precipitation desoxydation 扩散氢 diffusible hydrogen 初始扩散氢 initial diffusible hydrogen 100℃残余扩散氢 diffusible hydrogen remained at 100℃ 残余氢 residual hydrogen 去氢 dehydrogenation 去氢热处理 heat treatment for dehydrogenation 脱硫 desulphurization 脱磷 dephosphorization 渗合金 alloying 微量合金化 microalloying 一次结晶组织 primary solidification structure 二次结晶组织 secondary solidification structure 联生结晶 epitaxial solidification 焊缝结晶形态 solidification mode in weld-bead 结晶层状线 ripple 多边化边界 polygonization boundary 结晶平均线速度 mean solidification rate 针状铁素体 acicular ferrite 条状铁素体 lath ferrite 侧板条铁素体 ferrite side-plate 晶界欣素体 grain boundary ferrite; polygonal ferrite; pro-entectoid ferrite 粒状贝氏体 granular bainite 板条马氏体 lath martensite 过热组织 overheated structure 魏氏组织 Widmannst?tten structure M-A组元 martensite-austenite constituent 焊件失效分析 failure analysis of weldments 冷裂判据 criterion of cold cracking 冷裂敏感系数 cold cracking susceptibity coefficient 脆性温度区间 brittle temperature range 氢脆 hydrogen embrittlement 层状偏析 lamellar segregation 愈合 healing effect 断口金相fractography 断口 fracture 延性断口 ductile fracture 韧窝断口dimple fracture 脆性断口 brittle fracture 解理断口 cleavage fracture 准解理断口 quasi-cleavage fracture 氢致准解理断口 hydrogen-embrittlement induced 沿晶断口 intergranular fracture 穿晶断口 transgranular fracture 疲劳断口 fatigue fracture 滑移面断口 glide plane fracture 断口形貌 fracture apperance 断口试验 fracture