TS液压连续提升系工艺原理.docVIP

TS液压连续提升系统工艺原理 “液压同步提升技术”采用穿芯式结构液压提升器作为提升机具，以柔性钢绞线作为提升承重索具。有着安全、可靠、承重件自身重量轻、运输安装方便、中间不必镶接等一系列独特优点。液压提升器两端的楔型锚具具有单向自锁作用。当锚具工作（紧）时，会自动锁紧钢绞线；锚具不工作（松）时，放开钢绞线，钢绞线可上下活动。液压提升过程见如下框所示，一个流程为液压提升器一个行程。当液压提升器周期重复动作时，被提升重物则一步步向前移动。 第1步：上锚紧，夹紧钢绞线； 第2步：提升器提升重物； 第3步：下锚紧，夹紧钢绞线； 第4步：主油缸微缩，上锚片脱开； 第5步：上锚缸上升，上锚全松； 第6步：主油缸缩回原位。 液压提升器工作示意图 施工工艺流程 操作要点 1、提升上吊点设置 液压同步提升设备吊装构件，需要设置专用提升平台，即合理的提升上吊点，提升上吊点布置液压提升器，提升器通过提升专用钢绞线与待提升构件上的对应下吊点地锚相连接。 提升上吊点设置为：将提升梁放置于两个塔架顶部，形成门架，提升梁上放置提升器，钢绞线从提升梁的中间穿出，与下吊点连接。 上吊点示意图 提升梁示意图 提升下吊点设置 提升下吊点与上吊点对应而设置，提升下吊点内安装提升专用地锚，提升地锚通过钢绞线与提升上吊点内的提升器连接。 制作专用下吊具，与设置在合成塔顶端的耳板相连，提升地锚安装于下吊具内。 下吊点示意图 以上全由柳州山姆预应力机械有限公司提供 联系人:李先生 联系电话本公司提供销售以及技术指导 position-related consumption of civil servants has been swept by finance, consumer, regardless of cost, extravagance and waste in the civil service position-related consumption, abuse, corruption and embezzlement, corruption is important. Then, under the conditions of market economy, how to reform the existing civil duty consumption management, explores a source to prevent and curb the post consumption corruption way, is currently a major issue faced by honest work. 　　Recently, I conducted research on this issue, this problem on some humble opinions. First, the existing public servants duty consumption the main problems seen from the investigation and reasons, in recent years, public servants duty consumption caused by the abuses and not a person of integrity, is one of the major problems in the party in Government, its operation order have a negative effect on the party and Government organs, seriously damaging the image of the party and the Government, undermining the relationship between party and the masses, effect, opening up and economic construction. From I County in recent years of governance situation see, positions consumption in the produced of two not phenomenon rendering four a features: a is positions consumption system lost has