钢坯冷锯机液压系统计说明书.docVIP

钢坯冷锯机液压系统设计 摘 要 随着我国国民经济的快速发展，工业化程度逐年提高，作为基础产业的钢铁业规模已连续数年稳居世界首位，每年生产将近一亿吨的热轧及冷弯型材、管材、棒材，这其中80﹪ydraulic System Design Of Cold Steel Machine Abstract With the rapid development of Chinas national economy and the increasement of the degree of industrialization over the years , as the basic industries of iron and steel industry has the size of its position as the world for several years, and annual production of nearly 100 million tons of hot-rolled and cold-formed profiles, tubes, rods, which more than 80% of the products are completed using the saw-cut head, cut tail, cut off length work productivity because of the high quality of the sawing, and low running costs. Compared with the shearing machine, metal has not been forcibly pulled off the plastic part, thus accuracy of the incision rolling is higher. Metal Cutting Saw has become an important segment of the modern steel rolling production line. Whether it is the normal operation ，it relates to the whole rolling line of the normal production capacity. To this end, the design is the hydraulic drive system saw the cold steel. This is a very important system, which includes two slip: the process of clamping cylinder and the clamping cylinder sawing the sawing process. During the design process, these two slip calculation for the force analysis, the selection of the various components are described. The implementation of hydraulic components, hydraulic valves, hydraulic components and auxiliary pumping station is calculated. Key words: Hydraulic drive system; Cold Saw; Hydraulic valve; Pumping station 目 录 1 绪论 1 1.1 锯切机械的组成 1 1.2 金属冷切圆锯片国内外的发展趋势 1 1.3 锯机的分类及其特点 1 1.3.1 摆动式锯机 2 1.3.2 平推式锯机 2 1.4 液压传动的介绍 3 1.5 液压传动的特点 3 1.5.1 液压传动的优点 3 1.5.2 液压传动的缺点 4 1.6 课题设计内容介绍 4 2 液压系统的相关设计参数 5 3 制定系统方案和拟定液压系统图 6 3.1 液压系统的组成及设计要求 6 3.2 制定系统方案 6 3.3 拟定液压系统原理图 7 4 载荷的组成和计算 8 4.1 液压缸载荷组成 8 4.2 各液压缸载荷的计算 9 4.2.1 夹紧缸的载荷计算 9 4.2.2 锯切缸的载荷计算 10 5 计算液压缸的主要结构尺寸 12 5.1 初选系统工作压力 12 5.2 液压缸的主要结构尺寸计算 12 5.2.1 液压缸的主要结构尺寸组成 12 5.2.2