常见做工质量问题.docVIP

Frequent Occur Quality Issue Collection 常见疵品种类 Cutting 裁剪篇 1. Fabric selvage should be removed during cutting 面料布边应在裁剪过程中扔掉 2. Shade stamp should be stamped at the place of seam allowance 打码纸应打在缝份位置 3. Cutting grain should not be off 裁剪丝缕应直顺 4. Clean fuse press and all areas when going from dark colors to light colors. 粘衬时,如从深色换到浅色,要先清理粘衬机 5. Tolerance among same panels should not surpass 1/8’’ 同码裁片之间尺寸误差不可超过1/8’’ Sewing 缝纫篇 6. Label should be centered; 商标应居中 7. Stitches, tension and feed should be adjust by using a scrap of same type fabric to be sew