Centos网卡mac不匹配.docVIP

Centos 更换主板后，识别不到网卡的解决办法。 重启网卡 遇到如下错误提示 解决方法： 1.打开etc/sysconfig/network-scripts/ ficfg-eth0，确定ONBOOT应该为yes， 2.检查ficfg-eth0的MAC和ifconfig现实的MAC是否相符，并修改ficfg-eth0的MAC。 3.重启服务，service NetworkManager restart ,service network restart. 4.然后系统会自动识别到网卡信息，就ok了。 解决办法：首先，打开/etc/udev/rules.d/70-persistent-net.rules内容如下面例子所示： # vi /etc/udev/rules.d/70-persistent-net.rules# This file was automatically generated by the /lib/udev/write_net_rules# program, run by the persistent-net-generator.rules rules file.## You can modify it, as long as you keep each rule on a single# line, and change only the value of the NAME key.# PCI device 0x1022:0x2000 pcnet32 SUBSYSTEM net, ACTION add, DRIVERS ?*, ATTR address 00:0c:29:8f:89:97, ATTR type 1, KERNEL eth*, NAME eth0# PCI device 0x1022:0x2000 pcnet32 SUBSYSTEM net, ACTION add, DRIVERS ?*, ATTR address 00:0c:29:50:bd:17, ATTR type 1, KERNEL eth*, NAME eth1 记录下，eth1网卡的mac地址00:0c:29:50:bd:17 接下来，打开/etc/sysconfig/network-scripts/ifcfg-eth0 # vi /etc/sysconfig/network-scripts/ifcfg-eth0 将 DEVICE eth0? 改成? DEVICE eth1? ,将 HWADDR 00:0c:29:8f:89:97 改成上面的mac地址? HWADDR 00:0c:29:50:bd:17 最后，重启网络 # service network restart或者 # /etc/init.d/network restart 正常了。