PCBMSDS__.docVIP

中山市精华电子原料有限公司 Material Safety Data Sheet物质安全资料表 一、物品与厂商资料表Material name and supplier information 物品名称Name GH-8001BKD 同义名称Description Fluid sensitive solder mask ink液态感光阻焊油墨 制造商或供货商名称Supplier name 中山市精华电子原料有限公司 制造商或供货商地址Supplier address 中山市三角镇高平工业区 紧急联络电话Phone number （0760 传真电话Fax （0760 二、分辨识资料Distinguish information 物料主要成分明细Chief ingredient of material： 主要成分名称 CAS.NO percentage主要成分百分含量 Hazard material classify危险物质分类 亚克力树脂acrylic resin 44.5 6 丙烯酸单体acrylic acid 28961-43-5 8.0 6 甲阶酚醛环氧树脂novolac epoxy resin 5.3 6 高沸点溶剂 solvent with high boiling point 64742-94-5 10.0 6 硫酸钡barium 20.0 6 光引发剂photo-initiator 71868-10-5 6.2 6 助剂additives 6.0 6 三、危害辨识资料 最重要的危害效应The most important toxic effect Inhibitory Effects on the central Nervous System, may into lung while swallow or vomit, may cause loss of consciousness会抑制中枢神经系统，吞食或呕吐时可能倒吸肺部，高浓度暴露可能道致意识丧失。 健康危害效应health hazard The steam will be decomposed by react with free radical of hydrogen in the air蒸气释放至大气中会与氢气自由基作用而快速分解掉。 环境影响environmental pollution The steam is lighter than air and easy to spread其蒸气比空气轻，易传播至远处。 物理性及化学性危害Physical and Chemical hazard The steam is lighter than air and easy to spread其蒸气比空气轻，易传播至远处。 特殊危害Other hazards 主要症状main symptoms Headache, vomit, faint, tire, in appetence, dry skin, swelling, cornea heat, irregular heartbeats, difficulty breathing, dizzy 头痛、呕吐、晕眩、疲劳、食欲不振、皮肤干裂且灼热、红肿、角膜灼热、心率不整、呼吸困难、头晕眼花。 物品危害分类hazard class 3 (poisonous substance) 3（毒性物质） 四、Emergency measures紧急措施 First aid of different way不同暴露途径之急救方法： Inhalation:1.remove the pollution source or supply fresh air to the patient 2.Go to hospital ASAP 吸入：1、移除污染源或将患者移至新鲜空气处。 2、立即就医。 Skin touched:1 Wash the polluted place 5minutes by water and soap 皮肤接触：1、以水及肥皂冲洗受污染部位5分钟，或直到污染物除去。 Eye touched:1.Wipe off or sponge up the left chemicals ASAP 2.Shove out eyelid, wash 15minute with warm water 眼睛接触：1、尽快插掉或吸掉多余的化学品。 2、立即将眼皮撑开，用流动的温水缓和冲洗15分钟，或直到污染物除去。 Eaten:1.If the patient has loss his co