5.2.1.3 PRIMOFIT系列管件测试.pptVIP

October 2007 PRIMOFIT product tests PRIMOFIT? Product tests Table of Contents Vibration test 1 Test Nr.: 002/2006 Date: 16.02.2006 Test items PRIMOFIT: 2 pcs. female adaptors 1” 2 pcs. couplings 1” 2 pcs. elbows 1” 5 pcs. steel pipes 1” EN 10255 Conditions: electric motor 1.200 rmp test duration 15 minutes water pressure 70 bar Vibration test 2 Results: After 15 minutes continuous vibration testing: no leakage at pipes no leakage at PRIMOFIT compression fittings ? test passed! Pressure and tensile test – steel pipe 1 Test Nr.: 004/2005 Date: 24.10.2005 Test items PRIMOFIT: 2 pcs. female adaptors 1” 1 pcs. steel pipe 1” EN 10255 Pressure test: slow pressure increase in 5bar steps up to 220bar Result: first leakage at 200bar!! ? test passed! Pressure and tensile test – steel pipe 2 Tensile test: tested items are the same which were used in pressure test pull speed 0,416mm/s Result: the pipe was pulled out of the fitting in the length of 6mmat a tensile force of73,74kN ~ 7 tons!! ? test passed! Pressure and tensile test – PE-X pipe 1 Test Nr.: 020/2007 Date: 13.03.2007 Test items PRIMOFIT: 2 pcs. female adaptors 1 ?” / 40mm 1 pcs. PE-X pipe 40mm Tensile test: pull speed 0,416mm/s Result: test was stopped at a tensile force of 8,97kN ~900kg because only the pipe moved and the fittings stayed in position ? test passed! Pressure and tensile test – PE-X pipe 2 Pressure test: tested items are the same which were used in tensile test slow pressure increase up to 10, 25, 45 and 55 bar Result: up to a pressure of 55bar the connections remained leak-tight but the PE-X pipe burst dismantling of the assembly shows the grooves in the PE-X pipe done by the locking ring ? test passed! Pressure and tensile test – copper pipe, locking ring for steel pipes 1 Pressure test Test Nr.: 023/2007 Date: 16.07.2007 Test items PRIMOFIT: 2 pcs. female adaptors?” / 20mm with locking ring for steel 2 pcs. inside stiffeners 19,6mm;