第2章固体激光材料及典型固体激光器_02剖析.pptVIP

  • 4
  • 0
  • 约9.18千字
  • 约 81页
  • 2017-03-10 发布于湖北
  • 举报

第2章固体激光材料及典型固体激光器_02剖析.ppt

掺钛蓝宝石的上能级寿命仅为3.2微秒,因此需采用短脉冲光泵浦。同时,泵浦等的输出不能为掺钛蓝宝石晶体直接吸收,需要用荧光转换器把灯的输出转换为蓝-绿光。 * * 我们首先关心的问题是,在什么情况下傍轴光线能在腔内任意多次往返而不横向逸出。由2-1-18可以看出,这样要求对n次往返后的矩阵的各个元素对任意的n保持有限,这就要求为实数且不应为。这样可以得到 从前面的推倒可以看出,共轴球面腔的往返矩阵虽然与初始坐标无关,但是各元素的具体形式要保持一致就要求初始位置在M1上。但是可以证明:对于一定几何结构的球面腔1/2 A+D 是一个不变量 * In the stability diagram, in figure 4.13, the dark region marks the area of stability. The stability region is surrounded by two hyperbolas defined by the stability criterion. A few common cavities are marked on the stability diagram. A cavity is stable if the center of curvature of one of the mirrors, or the position o

文档评论(0)

1亿VIP精品文档

相关文档