2017SS春女装流行趋势.docVIP

2017SS春夏女装流行趋势 本期POP服饰流行前线分享的是：2017SS春夏女装流行趋势,工艺趋势—主题为记忆Memory。 人们把对生活现状的压力发泄于缅怀过去，它不是祭奠，而是憧憬。它伴随着岁月的消逝驶向澄净的明天，返回人们本真的心田。充满记忆的手工元素，细密考究的针法工艺，勾画出回忆中温暖柔情的画面，传递着美好质朴的恋旧情怀。 图案工艺—花卉刺绣 花朵是浪漫与生机的表达，以刺绣工艺绘制出的蜿蜒花枝，结合不同的元素创作新图案结构，调和出新一季的复古情调。 工艺应用—花卉刺绣 图案工艺—扎染艺术 扎染是以布匹作为载体的传统涂染工艺，经过改良色彩多样、形状多变。以几何状的色块，发散性的晕染渐变为主，多样化的手法与交融的色彩，铺陈出了神秘另类的艺术效果。 工艺运用—扎染艺术 图案工艺—佩斯利钉珠 佩斯利图案用钉珠工艺来呈现。多彩的钉珠或与其他工艺元素结合，串联成繁复精致的佩斯利花纹，打造出极具装饰感的浓郁热烈的民族风格纹样。 工艺运用—佩斯利钉珠 以上内容图片仅可供参考哦，如果您看的还不够过瘾，还不够真正解决您设计需求，可以来POP官网下载高清矢量设计图稿，获取更多设计灵感来源，时尚流行面料，最新四大时装周流行趋势报告等最新时尚资讯资料，或关注微 信公号：POP时尚网络，国际鞋子设计在线，POP高端趋势网了解最新时尚趋势也可以直接拨打4008-210-500咨询我们哦！ Ellipticity of elbow pipes with diameters less than or equal to 150 mm must be not greater than 8% diameter of 200 mm or less shall not be greater than 6%. Wall thickness of the pipe wall thinning rate must not exceed the original 15%. Crease roughness: diameter 125 mm or less, shall not exceed 3 mm diameter less than or equal to 200 mm, not more than 4 mm. 7.3.9 simmering bending production of square steel tube extension, to use the whole tube bending. Interface if necessary, the welding position should be located in the middle of the vertical arm. 7.3.10 install expansion joints should be done. If design is not required, pipe compensator lengthen should conform to the requirements in the following table: square scale length δ x is equal to 1/2. Pre stretch tolerance: casing + 5 mm, +10 mm. 7.3.11 pipe form, location, spacing shall meet the design and specifications. 7.3.12 piping on back or return pipe at higher levels of the upper to automatic valve to install a drain valve below the horizontal parts. 7.3.13 supports and hangers of checks and the number 1) hanger installed must be checked before installation of supports and hangers part models, specifications of