xx工程安全施方案.docVIP

xxx项目工程 xxx建筑有限公司 编制人：二0一五年x月 一、编制依据及说明 1、编制依据： 1）施工合同。 2）建筑施工图、设计说明书、图纸会审纪要。 3）图家、行业及地方有关政策、法律、法令、法规。 4）国家强制性标准、施工验收规范、规程。 5）工艺标准及安全操作规程。 7）本公司管理规章制度及本公司工地文明施工管理细则。 2、编制说明： 1）、为保证本工程安全文明施工目标实现，并指导整个施工过程，按照国家法律、法规及管理制度进行施工，特编制本方案。 2）、方案中重点对各施工阶段的安全、文明施工措施及用电、机械设备使用和临时设施布置管理进行了重点阐述。 二、 of the contract must be /; Seven or one copy of the contract, each contract form, contents and elements; VIII, master/slave contract and complete specification interface, contract number. 5.9 other provisions the Bank supports risk managers, accompanied by professional risk management, such as account managers handle the pre-loan investigation, contracts and other key sectors. Risk managers and other professional accompanied by risk managers, account managers are still subject to these measures procedures for the fulfilment of duties, qilu Bank risk managers, risk managers, in accordance with the administrative procedures trial implementation called for duties. Risk management risk managers and other professional personnel involved in handling, account manager with double handle. 6. the credit policy of the Bank to support capital uses reasonable and sufficient source of repayment, parties of good credit personal loans. As described in the Banks credit policy, marketing advice, business management and other documents. 7. process description and control business processes including personal loans loan application, acceptance and investigation, risk assessment and review, loan approval, Contracting, loan origination, loan payments, credit administration and loan recovery and disposal after nine stages. Process input for receipt of the borrowers application, the output of the process for loan recovery. Process description and control of specific requirements are as follows: node operation flow control point 1. loan application 1. loan borrowers applying for the loan. Risk 1: risk Description: loan qualifications did not meet the Bank requirements. Control measures: according to the