实验三 VHD 语言设计简单电路1.docVIP

实验三 VHDL 语言设计简单电路 一、 实验目的 1、 学习非门、与门、与非门、或门、或非门、异或门和异或非门的VHDL描述； 2、 学习VHDL的文字规范描述、程序书写方法和Quartus II 6.0功能仿真； 二、 实验内容 1、参考教材3.1.5节，用VHDL分别设计并仿真基本门电路1位全加器f_adder.vhd和二选一数据选择器mux21.vhd。分析比较输出的波形仿真图并验证程序的正确性。 三、 实验步骤 1、建立工程shiyan3_ljj 2、创建VHDL文件 3、输入程序 4、设置顶层实体名，进行综合编译 5、进行综合编译 6、建立波形文件，进行波形仿真 7、导入引脚 8、设置激励信号 9、生成网表 10、仿真 section of the Department of project management; Project documents and information: Project Engineering Department; Materials and equipment: material supply projects; Security controls: the project Department of safety and security; Construction machinery: Project Engineering Department; Financial: Project Management Department of finance; Security and fire services: project security. 3.3.5 management representative and project manager in this item specifies that the Chief Engineer is the management representative, responsible for the operation of quality management system and supervision, regardless of how his other responsibilities, should have a clear mandate to: ensure that the quality management system is implemented and maintained; The running of the quality management system to the project manager, including needed improvements; Always be aware that the customers needs and requirements. 3.4 3.4.1 project management review should be an annual review of its quality management system to ensure its continuing suitability, adequacy and effectiveness. 3.4.2 Administration review by the project manager responsible for organization and implementation, project quality control Department is responsible for specific tasks. 3.4.3 the management review should compare and evaluate the following input: internal and external quality audits and corrective effect; Customer feedback on the construction, installation, commissioning, service information (complaints and satisfaction); Quality records, quality compliance with trend reports, analysis of results; Combined with the quality policy and the achievement of the go