《计算机应用基》课程考试大纲.docVIP

《计算机应用基础》考试大纲 一、课程的性质和任务 计算机应用基础是高等教育各专业必修的公共基础课，它是一门操作性很强的课程。内容着重计算机的基础知识、基本概念和基本操作技能，并兼顾实用软件的使用和计算机应用领域的前沿知识，其任务是使学生掌握计算机应用的基础知识，具有操作和使用微机系统的基本能力。 二、课程的目的和要求 本课程旨在使学生了解和掌握计算机的基本知识和基本操作技能，课程基本要求如下： 1、具有计算机的基础知识。 2、了解微型计算机系统的基本组成。 3、了解操作系统的基本功能,掌握Windows的使用方法。 4、了解文字处理和表格处理的基本知识,掌握Windows环境下Word和Excel的基本操作,熟练掌握一种汉字（键盘）输入方法。 5、了解计算机网络的基本概念和掌握因特网 Internet 的电子邮件及浏览器的使用。 6、具有计算机安全使用和计算机病毒防治的知识。 7、了解演示文稿幻灯片灯片的基本知识及制作。 8、了解当前常用工具及流行应用软件的基本操作。 五、参考教材 1、教材 《大学计算机基础》，金鑫 唐小毅 张艳梅，中国铁道出版社，2007。（教材购买请咨询教务处教材科或联系出版社，也可根据大纲要求参阅相关书籍） center pin checks and anchoring the inner cylinder. According to While coupling alignment should keep oil out of cavity and locate the rotor axis neck raised are within the prescribed limits, there should be no gaps, Horn, Horn and Horn 0.05mm feeler gauges fit into. Center coupling, condenser water filling and water-filled according to factory requirement. For coupling three supported rotor Center, the mouth under the coupling between the value should be as stipulated in the manufacturer, usually 0.15~0.25mm. In the case of coupling connection, if possible, lifting only one bearing end of the support bearing of the rotor, remove the bearing, fitted with special tiles and special lifting tools, disc rotors, check the journal flutter tile, should generally be less than 0.10MM. When the couplings and rotor comes when there is a conflict, the coupling Centre shall prevail. 6.4.5.2.2 shaft looking for: ... 6.4.5.3. Provisional bolt confirmed the positioning of the rotor size, as well as the coupling between the adjustment shim thickness accuracy, drawings to meet the technical requirements. Plane, cylindrical and clean the coupling bolt holes should be clean and without burrs, scrap iron and grease-free, relative position of the coupling according to the drawing requirements are. Coupling top screws, round distance apart, indicators to monitor movement of the aircraft, its value is allowed to pass the value axis moving, mounted adjustment pad