史上最全面的初数学思维导图.docVIP

一、全等三角形思维导图 二、相似三角形思维导图 三、几何初步和三角形思维导图 四、投影与视图思维导图 五、圆思维导图 六、实数思维导图 七、代数式思维导图 center pin checks and anchoring the inner cylinder. According to While coupling alignment should keep oil out of cavity and locate the rotor axis neck raised are within the prescribed limits, there should be no gaps, Horn, Horn and Horn 0.05mm feeler gauges fit into. Center coupling, condenser water filling and water-filled according to factory requirement. For coupling three supported rotor Center, the mouth under the coupling between the value should be as stipulated in the manufacturer, usually 0.15~0.25mm. In t