教学管理系统网网上评教操作指南.doc

教学管理系统网站网上评教操作指南 1．评教目的及意义：学生评教工作在我校已经开展多年，学生评教是学生参与教学管理的一项改革，是学生行使自己权利的方式之一，也是教师不断改进教学方法，提高教学质量的动力来源。为及时反馈教师教学的情况，促进我校教学水平的提高，请同学们本着对教师负责和对自己负责的原则，公正、公平地做出你神圣的选择。 2．评教范围：本学期担任本、专科教学任务的理论及实验教师，注意要对每一位教师分别进行评教，不要漏掉任何一位教师。 3．网上评教操作指南： 第一步：打开学校主页。 第二步：进入“教育在线”。 第三步：点击 “网上选课”，进入教学管理系统。 第四步：选择教学管理系统网站，点击进入登陆界面。选择“学生”身份，并输入学号、密码，进入教学管理系统。 第五步：点击“网上评教”，进入评教窗口 第六步：点击“提交教学评价表”进入评价窗口。 第七步：点击相应课程进行评价。 第八步：在评教窗口中按要求完成评教。请同学们认真阅读每一项评价指标，结合课堂听课情况，独立进行评教。评价完成后提交，并返回对下门课程进行评价。 请同学们按上述步骤对全部课程完成评价，谢谢！ 理论评教咨询电话 史老师 赵老师 实验评教咨询电话 赵老师 center pin checks and anchoring the inner cylinder. According to While coupling alignment should keep oil out of cavity and locate the rotor axis neck raised are within the prescribed limits, there should be no gaps, Horn, Horn and Horn 0.05mm feeler gauges fit into. Center coupling, condenser water filling and water-filled according to factory requirement. For coupling three supported rotor Center, the mouth under the coupling between the value should be as stipulated in the manufacturer, usually 0.15~0.25mm. In the case of coupling connection, if possible, lifting only one bearing end of the support bearing of the rotor, remove the bearing, fitted with special tiles and special lifting tools, disc rotors, check the journal flutter tile, should generally be less than 0.10MM. When the couplings and rotor comes when there is a conflict, the coupling Centre shall prevail. 6.4.5.2.2 shaft looking for: ... 6.4.5.3. Provisional bolt confirmed the positioning of the rotor size, as well as the coupling between the adjustment shim thickness accuracy, drawings to meet the technical requirements. Plane, cylindrical and clean the coupling bolt holes should be clean and without burrs, scrap iron and grease-free, relative position of the coupling according to the drawing requirements are. Coupling top screws, round distance apart, indicators to monitor movement of the