喜利得激光测量产品介绍.pptVIP

PML 32能做什么？ 主要应用领域 主要应用领域 PS 200 S 探头 PS 200 M 主机 附件 技术参数 喜利得集团介绍 -- 世界知名的建筑产品供应商 喜利得集团介绍 喜利得集团介绍 喜利得是目前世界范围内为数不多的能够研发、生产全系列激光产品的供应商。 635nm:Approx. 2 x better visible than a 650nm and approx. 7 x better visible than a 670nm Laser Laser class 2 (II), visible, Output power 1mW:Laser class 2 is eye-safe.The PR 16 has a warning sticker on the housing.Safety on the operating modes:0 r.p.m Stop mode (Do not stare into the laser beam) 50 / 80 r.p.m Manual mode / Beam catcher operating mode mode (Eyelid closure reflex protects the eye should anyone happen to look briefly into the laser beam) 300 r.p.m Operating mode with laser detector (Eyelid closure reflex protects the eye should anyone happen to look briefly into the laser beam) 90°-Reference beam:Allows to transfer 90°-angels when the PR 16 is set up in the vertical direction. Note when setting up the PR 16:- There is a setting up mode and an operation mode.- During the first minute (setting up mode) the tool re-adjust (levels) itself automatically.- After the PR 16 is set up at the right position and has not been disturbed for one minute, the tool switches to the operating mode (the shock sensor is then activated = if the tool is tilted in this case it stops). Speed of rotation:0 r.p.m Stop mode (Rotating head can be turned manually in either direction 50 r.p.m. Manual mode (The spot can be found easier if the beam moves not so fast; helpful under special conditions with strongly reflective obstacles around where the scanning function may be annoyed) 80 r.p.m Beam catcher operating mode mode 300 r.p.m Operating mode with laser detector  LED-Inclination (X or Y axis): - green = automatically (servo) levelled. - Red = Manually (servo) levelling possible. The beam catcher’s working range depends very much on the working conditions (light, surroundings).If the conditions are optimal, it is possible to use the beam catcher over a range of more than 50m (165ft)