实验指导书：管统计学(Excel版本).docVIP

管理学院实验指导书 实验 名称 实验1： 实验目的及要求 实 验 内 容 练习绘制折线图、直方图、饼图等统计图的相关操作。 练习计算二项分布、泊松分布、指数分布、正态分布等概率值的相关操作。 注：实验内容部分可另附页管理学院实验指导书 实验 名称 实验2： 实验目的及要求 实 验 内 容 利用课本例题和练习题学习参数区间估计的相关计算过程 注：实验内容部分可另附页管理学院实验指导书 实验 名称 实验： 实验目的及要求 实 验 内 容 注：实验内容部分可另附页管理学院实验指导书 实验 名称 实验4： 实验目的及要求 实 验 内 容 注：实验内容部分可另附页管理学院实验指导书 实验 名称 实验： 实验目的及要求 掌握相关系数的相关计算。 实 验 内 容 注：实验内容部分可另附 and performance test copies of the record. If necessary, review should be carried out; 4) for spring hangers (included simple spring, hangers and constant support hangers) it should also be recognized as setting and locking of loads. 5) check the surface quality, folded layering and without cracks, rust and other defects. 5) after completion of the test and control drawing number one by one, by series baled. Color alloy steel parts, the parts marking installation location and rotation about the direction you want. 7.3.14. hangers installation 7.3.14.1 hanger layout a. a clear design of hanger should be installed strictly in accordance with the drawings and designs shall not be installed wrong, missing, etc. B. own arrangement of piping support and hanger set and selection should be based on comprehensive analysis of general layout of piping systems; cold installation of steam pipe with particular attention reserved for compensation of thermal expansion displacement and orientation. C. support systems should be rational to withstand pipe loads, static load and incidental load; reasonable piping displacement; guaranteed under various conditions, stress are within the allowed range. Strength, stiffness, and meet requirements to prevent vibration and soothing water, without affecting the adjacent equipment maintenance and other piping installation and expansion. D. equipment connected to the interface to meet pipeline thrust (torque) limit requirements; increase the stability of piping systems to prevent pipeline ... Tube wall thickness (mm) 2-3 4-6 7-10 weld form no slope mouth weld strengthening hei