教你如何用PS镜制作精美的边框.docVIP

教你如何用PS滤镜制作精美的边框PS的功能很强大,学了一个多月,我只学到了一点皮毛，很多都还不会操作，但我会努力的去学习。PS滤镜功能可以制作出很多精美的边框，可以用来美化我们的照片等等。下面我把我所喜欢的几款制作写出来，供大家参考一下！没有PS的点这里/soft/808.html下载一个就可以了！.方法如下： 1、在PS里面打开图片—双击图片解锁—选框（比原图要小一点）—快速进入蒙板（按Q可以直接进入） 2、滤镜—艺术效果—水彩（设置数值如图）—好 3、滤镜—艺术效果—壁画（设置数值）—-好 4、滤镜—扭曲—球面化（数值默认）—好 5、滤镜—像素化—碎片（1次） 6、滤镜—锐化—锐化（8次） 7、退出蒙版—选择—反选—删除（Delete） 8、图象—修正（默认）—好 9、编辑－描边—设置—最后保存 最终效果： 呵呵。。。很简单的吧！ 这只是一小部分,还有好多好看的边框等我们去发觉了,只要好的运用滤镜里的功能就行了。　　 ???????? 好开心啊，今天是端午节，偶的日记也上首页了，有好多的友友光顾偶的空间，谢谢你们！祝你们节日快乐！请你们吃  and performance test copies of the record. If necessary, review should be carried out; 4) for spring hangers (included simple spring, hangers and constant support hangers) it should also be recognized as setting and locking of loads. 5) check the surface quality, folded layering and without cracks, rust and other defects. 5) after completion of the test and control drawing number one by one, by series baled. Color alloy steel parts, the parts marking installation location and rotation about the direction you want. 7.3.14. hangers installation hanger layout a. a clear design of hanger should be installed strictly in accordance with the drawings and designs shall not be installed wrong, missing, etc. B. own arrangement of piping support and hanger set and selection should be based on comprehensive analysis of general layout of piping systems; cold installation of steam pipe with particular attention reserved for compensation of thermal expansion displacement and orientation. C. support systems should be rational to withstand pipe loads, static load and incidental load; reasonable piping displacement; guaranteed under various conditions, stress are within the allowed range. Strength, stiffness, and meet requirements to prevent vibration and soothing water, without affecting the adjacent equipment maintenance and other piping installation and expansion. D. equipment connected to the interface to meet pipeline thrust (torque) limit requirements; inc