人教版化学1()教材知识与技能教学目标说明(讨论稿).docVIP

人教版化学1（必修）教材知识与技能教学目标说明（讨论稿） 广州市教育局教研室化学科 说明：本说明中，将教学要求分为基本要求、弹性要求、发展要求和不宜拓展四个层次。 1.基本要求：全体学生应在本节学习时掌握； 2.弹性要求：有条件的学生可在本节增补； 3.发展要求：全体学生可在人教版《普通高中课程标准实验教科书·化学2（必修）》结束时掌握； 4.不宜拓展：留待选修学习。 第一章　从实验学化学 第一节　化学实验基本方法 第二节　化学计量在实验中的应用 第二章　化学物质及其变化 第一节　物质的分类 第二节　离子反应 第三节　氧化还原反应 第三章　金属及其化合物 第一节　金属的化学性质 第二节　几种重要的金属化合物 第三节　用途广泛的金属材料 第四章　非金属及其化合物 第一节　无机非金属材料的主角──硅 第二节　富集在海水中的元素──氯 第三节　硫和氮的氧化物 第四节　硫酸、硝酸和氨 appearance of the weld appearance quality technical requirements of the project must not have a molten metal stream does not melt the base metal to weld, weld seam and heat-affected zone surface must not have cracks, pores, defects such as crater and ash, surface smoothing, weld and base metal should be evenly smooth transition. Width 2-3 mm from the edge of weld Groove. Surface reinforcement should be less than or equal to 1 + 0.2 times the slope edge width, and should not be greater than 4 mm. Depth of undercut should be less than or equal to 0.5 mm, total length of the welds on both sides undercut not exceed 10% of the weld length, and long continuous should not be greater than 100 mm. Wrong side should be less than or at 0.2T, and should not be greater than 2 mm (wall thickness mm t) incomplete or not allow 7.5 7.5.1 installation quality process standards of the electrical enclosure Cabinet surface is clean, neat, no significant phenomenon of convex, close to nature, close the door. 7.5.2 Cabinet Cabinet face paints no paint, returned to rusted, consistent color. 7.5.3 uniform indirect gap from top to bottom, slot width 1.5mm 7.5.4 adjacent Cabinet surface roughness is 0. 7.5.5 the cabinets firmly fixed, crafts beautiful. 7.5.6 Cabinet surface gauge, switch cabinet mark clear, neat, firm paste. 7.5.7 Terminal row of neat, is reliable, the appearance is clean and not damaged. 7.5.8 cables neat and clean, solid binding, binding process in appearance. 7.5.9 the first cable production firm, crafts beautiful, clear signage does not fade. 7.