基于arm的猜戏设计.doc

ARM课程设计报告 基于ARM的猜拳游戏设计 院 系 ： 专业（班级）： 姓名： 学号: 指导教师： 职称： 完成日期： 成绩： 目 录 1 引 言 3 2 设计目的 4 3 设计内容 4 4 设计步骤 4 5 设计要点 4 6 设计内容 5 6.1 流程图 5 6.2 程序 6 6.2.1 头文件 6 6.2.2图像定义模块 7 6.2.3胜负定义模块 8 6.2.4画面定义模块 11 6.3 运行图像 13 7 结论 14 8 谢辞 15 9 参考文献 16 基于ARM的猜拳游戏设计 1 引 言 嵌入式系统是将先进的计算机技术、半导体技术和电子技术与各个行业的具体应用相结合后的产物。近年来，嵌入式产品己经成为IT产业的主流，越来越多的企业和研发机构都转向嵌入式系统的设计与应用上。从嵌入式操作系统未来的演变趋势看，PDA、手机等移动终端设备的快速增长，大大促进了嵌入式操作系统的发展。未来嵌入式系统的主要增长动力来自于消费类行业，比如嵌入式游戏。 [3] 王勇，嵌入式系统原理与设计[M]，浙江：浙江大学出版社，2007. [4] 封景刚，吴宝江.ARM嵌入式系统开发完全入门与主流实践 [5] RT-Thread工作室，RT-Thread mini2440平台开发手册[EB/OL].[2013-06-10], . [6] ARM公司.arm指令集[EB/OL].[2013-06-10], /p-01473299706.html. [7] 徐英慧.ARM9嵌入式系统设计：基于S3C2410与Linux[M].（第2版）. 北京：北航出版社，2010. appearance of the weld appearance quality technical requirements of the project must not have a molten metal stream does not melt the base metal to weld, weld seam and heat-affected zone surface must not have cracks, pores, defects such as crater and ash, surface smoothing, weld and base metal should be evenly smooth transition. Width 2-3 mm from the edge of weld Groove. Surface reinforcement should be less than or equal to 1 + 0.2 times the slope edge width, and should not be greater than 4 mm. Depth of undercut should be less than or equal to 0.5 mm, total length of the welds on both sides undercut not exceed 10% of the weld length, and long continuous should not be greater than 100 mm. Wrong side should be less than or at 0.2T, and should not be greater than 2 mm (wall thickness mm t) incomplete or not allow 7.5 7.5.1 installation quality process standards of the electrical enclosure Cabinet surface is clean, neat, no significant phenomenon of convex, close to nature, close the door. 7.5.2 Cabinet Cabinet face paints no paint, returned to rusted, consistent color. 7.5.3 uniform indirect gap from top to bottom, slot width 1.5mm 7.5.4 adjacent Cabinet surface roughness is 0. 7.5.5 the cabinets firmly fixed, crafts beautiful. 7.5.6 Cabine