ps教程：如何速消除黑眼圈.doc

ps教程：如何快速消除黑眼圈 　拍出的数码照片，MM有两个大大的黑眼圈，此时有没有办法后期处理挽救?这其实在数码照片后期处理中也是常用到的招术。咱们来看看如何快速消除黑眼圈。 　　第一步：打开MM的黑眼圈照片，按“Ctrl++”键将图像放大到300倍，在“工具”栏里用鼠标左键单击并按住“套索工具”不放，在弹出的工具选项中选择“多边形套索工具”。接着沿眼线将左眼黑眼圈部分选取，然后执行“选择→羽化”命令，在弹出的“羽化选区”对话框中将“羽化半径”设置为5像素，最后单击“好”按钮(图1)。 图1 　　第二步：在选区中单击鼠标左键并按住不放，拖动选区到脸部光滑的地方，接着按“Ctrl+C”拷贝选区，然后按Ctrl+V键粘贴(图2)。 图2 　　第三步：将复制的光滑皮肤移动黑眼圈上面，将黑眼圈遮盖住(图3)。 图3 　　·照片处理:PS快速消除肖像照片黑眼圈(2) 　　第四步：在“图层”面板中调节刚复制图层的“不透明度”到40%(图4) 图4 　　第五步：按前面几步的操作方法将右眼的黑眼圈也作同样的处理，处理完成效果如图5。 图5 　　第六步：利用“减淡”工具，用柔化大小20的画笔，然后调节“曝光度”为30%轻轻涂抹(图6)，使黑眼圈得到更好地消除。 图6 　　　　看看前后对比照片(图7)，满意吧? 图7 　　本文ps软件知识摘抄自最专业的软件培训平台“秒秒学”，如果你还想搜集更全面的ps技术，可以秒秒学官方网站进行咨询查看。 the drawings, first to become familiar with the drawings, mainly about the following aspects: 1) pages of drawings and diagrams, maps; 2) a comprehensive understanding of drawing; 3) finding of design-driven dimensions (), do not resize and adjust the size; 4) questioned the drawings; 5) develop buries a construction programme and technical clarification; 6) clear corners and special treatment; 7) controlled construction drawings to verify construction scheme and design. (2) at the construction site to find subject planted area: various engineering, first on the scene to find planted area, it must first understand the curtain wall installation section, and some projects are all curtain wall, the entire project is a region-wide, only partial walls, the zone is local. (3) identify the axis positioning: positioning the drawings shown in axis compared with the actual construction site to find out exactly where the axis positioning, axis positioning function are: 1) to help determine the origin of curtain walls; 2) acceptance of the installation is accurate; 3) adjust errors, and determine the error range. (4) find anchor points: according to site to find the exact location of the axis, according to the drawings provided by the content determine the positioning point; number of anchor points shall not be less than two points. Repeated measurem