4107 20自调式焊接滚轮架设计.docVIP

毕业设计（论文）任务书 专业 机械设计制造及其自动化 班级 机械0 姓名 下发日期 200-3-12 题目 专题 主 要 内 容 及 要 求 进 度 及 完 成 日 期 月日月日月日月日月日月日月日月日月日月日教学院长签字日 期 教研主任签字 日 期 指导签字 日 期 指导教师给定成绩(30%) 给定成绩(30%) 答辩成绩 （40%） Welding equipment is a machine which is used in welding production and welding processes, and it is conducive to welding production mechanization and automation, to improving assembly welding-quality. Then it could prompte to speed up the process of welding production of the various assistive devices and equipment. Welding roller is used initiative and welding pieces of the wheel between the Mount relay driven welding rotating mechanical deformation. Welding roller stands for the main pieces of tube welding and welding assembly. Welding roller standing by structural form is divided into two categories : the first category is long axis-wheel frame., the second category is modular roller frame. In this paper, twenty pairs of modular T-welded wheel for the design, as well as axial, bond and other main component of checking. The results showed that the main components to meet the requirements. The roller frame structure is simple, flexible, adaptive welded pieces of a strong, which is the most widely used form of the structure. And it could be fully considered the roller frame reasonable and economic, and other factors. Key words：weld, frock clamp, turning rolls; check; rationality 目 录 摘要…………………………………………………………………………………I Abstract……………………………………………………………………………II 目录…………………………………………………………………………………III 第1章绪论…………………………………………………………………………1 第2章焊接机械概述……………………………………………………………2 2.1 焊接的应用 …………………………………………………………………2 2.2 焊接机械装备 ………………………………………………………………2 2.2.1焊接机械装备的分类 …………………………………………………2 2.2.2焊接机械设备在焊接生产中的作用 …………………………………3 2.3焊接工装夹具 ………………………………………………………………4 2.3.1焊接工装夹具的分类 …………………………………………………4 2.3.2 焊接工装夹具的特点 …………………………………………………5 2.3.3焊接工装夹具的设计要求 ……………………………………………6 2.3.4焊接工装夹具设计方案的确定 ………………………………………7 2.3.5焊件在夹具中的定位 …………………………………………………8 2.4 焊接变位机械……………………………………………